649682
61
Zoom out
Zoom in
Previous page
1/164
Next page
- 61 -
3.4 BATTERY AND ALTERNATOR TEST
The measurements can be performed with the
battery connected to the vehicle, after connecting
the clamps. Select the measurement to be
performed using the “FUNCTION” button ( g. A.22).
On completing the test(s) disconnect the power
cable from the mains socket and disconnect the
clamps from the battery terminals.
NB: it is only possible to perform the tests without
a power supply if the tests type selection is made
after connecting the clamps to the battery terminals.
3.4.1 BATTERY TEST
Measure the voltage of the battery terminals.
BATTERY TEST SELECTION
DISPLAY
Procedure
- press the “FUNCTION” button ( g. A.22) to select
the function and the battery type ( g. A.20);
- connect the clamps to the battery terminals;
- press the “VOLT” button ( g. A.21) to select the
battery voltage ( g. A.1);
The measured voltage is indicated on the display
( g. A.2) and the battery status is indicated in graph
format ( g. A.5).
END OF TEST - EXAMPLE
DISPLAY LEGENDA
to be charged to be charged
full
3.4.2 CHARGE SYSTEM TEST
(ALTERNATOR)
This measures the battery charging capacity of the
vehicle alternator.
ALTERNATOR TEST SELECTION
DISPLAY
Procedure:
- press the “FUNCTION” button ( g. A.22) to
select this function ( g. A.18); the message “Bad”
appears on the display ( g. A.2);
- connect the clamps to the battery terminals;
- press the “VOLT” button ( g. A.21) to select the
battery voltage ( g. A.1);
- switch on the engine, taking it to approx. 1500
rpm;
-
switch on all the lights (full headlights, courtesy
lights, etc.) and all the accessories (air conditioning,
radio, etc.);
- check the display ( g. A.2) to read the alternator
functions and following status:
- “OK” - CHARGING IN PROGRESS;
- “SUF” - SUFFICIENT CHARGE;
- “BAD” - INSUFFICIENT CHARGE.
END OF TEST - EXAMPLE
DISPLAY LEGENDA
working
sufficient insufficient
3.4.3 BATTERY STARTING CHARGE
CAPACITY (CCA)
CCA TEST SELECTION
DISPLAY
Procedure:
- press the “FUNCTION” button ( g. A.22) to select
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Telwin DOCTOR CHARGE 50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Telwin DOCTOR CHARGE 50 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 9,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info