688826

Telair TIG3000B Inverter generator Manual

17
Zoom out
Zoom in
Previous page
1/44
Next page
Vers. 001
TIG 3000 B
17
GB
To carry out the data connection it is necessary
to remove the door from both generators. Then,
after running the lead through the cable holder
used for the other electrical connections, insert
the connectors at the end of the lead in the re-
spective 8-pole connectors (fig. 26 ref. 1).
If the data connection has not also
been made, do not start the generators with
their outputs connected in parallel because
this carries a risk of serious damage to the
two machines.
When operating in parallel, a single
generator may be started on its own.
The first generator to be started automatically
becomes the master.
5.10 Isolating the internal battery charger
In the event that it is decided to isolate the inter-
nal battery charger from the generator, a fuse
must be removed from the motor control circuit
board.
In this instance the battery will not be recharged
and an external device will have to be used.
To isolate the internal battery charger it is neces-
sary to remove the fuse from the relative fuse
holder (fig. 28 ref. 1) housed on the control
board.
6 OPERATING INSTRUCTIONS
6.1 Machine safety
The generator is enclosed in a sealed case and
therefore, there is no risk of contact with moving
parts at high temperatures (except for the exter-
nal part of the silencer) or with live wires.
The door is provided with a lock and key. The
key must not be left within the reach of children
or inexperienced persons.
The generating set has been manufactured in
compliance with the safety standards listed in the
declaration of conformity.
6.2 Fuel
Must be used unleaded petrol with a number of
octanees greater than 85.
Do not use exhausted petrol, ie it has remained
for more than three months in the tank.
6.3 Useful tips
To ensure a long efficiency of the genera-
tor and avoid malfunctioning of any utilities pow-
ered, it is advisable:
- Before starting the set, ensure the utilities are
disconnected (for example via the cutout
switch provided between the generator and
the system as described elsewhere in this
document) until the generator has started and
has reached steady state.
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Telair TIG3000B Inverter generator at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Telair TIG3000B Inverter generator in the language / languages: English as an attachment in your email.

The manual is 12,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Telair TIG3000B Inverter generator

Telair TIG3000B Inverter generator User Manual - Dutch - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info