Manual Telair Energy 2510D (page 13 of 44) (English)

688848

Zoom out

Zoom in

1/44

Vers. 002

Energy 2510 D

5.4 Battery Connection

To start up the generating set, you must connect

to the vehicle battery using a sheathed cable (to

determine its cross-section, see Table 1) in

compliance with the regulations in force.

For this purpose, the generating set is provided

with two terminals (fig. 18) used to connect the

positive and the negative poles of the battery.

Connect the positive pole cable (red cable) to the

terminal which is already provided with a red

cable (fig. 18 ref. 3) and the cable of the negative

pole (black cable) to the

terminal already

provided with a black cable (fig. 18 ref. 4). The

cable of the negative pole must be of the same

cross-section as the positive cable and must be

connected to both the negative pole of the

battery and the chassis of the vehicle.

The contact must be good. If necessary, remove

any paint or rust from the contact surface, and

protect the connection with grease.

The start-up battery must have a capacity of at

least

80 A/h.

The battery connected is recharged by the

generator with a max current of 5 A.

Always fit a 100 A fuse

onto the cable connecting the generating set

to the positive pole of the battery.

5.5 Electronic Control Panel Connection

Choose the position you want inside the vehicle

and make a rectangular hole sized 30 x 32 mm.

Identify the path for laying the connection cable

(fig. 22) from the control panel to the generating

set.

We remind you that a 5 m long cable is delivered

standard. Optional cables in longer sizes are also

available: 7 m (code 03797), 10 m (code 03798),

15 m (code 03799).

Arrange the connection cable (fig. 22) so as to

connect the black connector side (fig. 22 ref. 1) to

the control panel, and the white connector side

(fig. 22 ref. 2) to the generating set.

Let the connection cable coming from the

generating set out of the hole and connect the

black connector of the cable (fig. 22 ref. 1) on the

back of the electronic control panel. Fasten the

electronic control panel (Fig. 21) using self-

tapping screws sized 3 x 20 mm, and make sure

that the rear part does not touch other surfaces;

use slight pressure to fasten the plastic frame

until you hear the click of the fastening tabs.

Connect the other end of the connection cable

(fig. 22 ref. 2) to the proper white connector (fig.

23 ref. 1) which is located on the side of the

generator control box; observe proper connection

side.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Telair Energy 2510D in the language / languages: English as an attachment in your email.

The manual is 3,16 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Telair Energy 2510D Manual

Product: