617906
85
Zoom out
Zoom in
Previous page
1/128
Next page
TASCAM HS-20
85
10 – Internal settings
When recording, press the RC-HS20PD PAUSE key to enter
recording standby.
When recording, press the RC-HS20PD STOP key to stop
recording. The RC-HS20PD ONLINE key becomes unlit
when recording is stopped.
When this is set to “Disable”
Use of the RC-HS20PD ONLINE key will be ignored.
In recording standby, pressing the RC-HS20PD PLAY key
will not start recording.
When recording, pressing the RC-HS20PD PAUSE key will
not put the unit into recording standby.
PARALLEL page
Set the AUX 1-3 functions of the PARALLEL connector on this
page.
AUX Assign
Touch a knob to select it, making the background yellow,
and turn the DATA dial to set the function.
The functions that can be selected include F.FWD, REW,
MARK, MARK SKIP–, MARK SKIP+,and CALL.
o AUX1 Function:
Set the function of PARALLEL connector pin 17 (AUX1)
(default: MARK SKIP+).
o AUX2 Function:
Set the function of PARALLEL connector pin 18 (AUX2)
(default: MARK SKIP–).
o AUX3 Function:
Set the function of PARALLEL connector pin 19 (AUX3)
(default: MARK).
RS–232C page
Make RS-232C serial control transmission settings on this page.
Serial Mode
Set the serial connection mode with the following buttons.
Setting buttons: RS-232C (Default), RS-422
NOTE
Only the connector selected with this setting will function.
The RS-232C and RS-422 connectors cannot both be used
at the same time.
This setting is synchronized with the Serial Mode item on the
RS-422 page.
If an optional SY-2 has not been installed, this cannot be set
to RS-422.
Baud Rate (bps)
Set the transmission speed (baud rate) with these buttons.
Setting buttons (bps): 4800, 9600, 19200 and 38400 (default)
DATA Length
Set the DATA length in bits with these buttons.
Setting buttons (bits): 7 or 8 (default)
Parity Bit
Set whether or not there is a parity bit with these buttons.
Setting buttons: NONE (default), EVEN and ODD.
Stop Bit
Set the stop bit with these buttons.
Setting buttons (bits) 1 (default) and 2
85


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam HS-20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam HS-20 in the language / languages: English as an attachment in your email.

The manual is 4,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info