617906
84
Zoom out
Zoom in
Previous page
1/128
Next page
84
TASCAM HS-20
10 – Internal settings
I/O page
View the synchronization signal status and set timecode output
on this page.
NOTE
If an optional SY-2 has not been installed, the items will be
shaded and cannot be set.
STATUS
This shows the status of synchronization signals.
TIMECODE IN:
When timecode is input, the timecode frame rate is
shown.
WORD/VIDEO IN:
This shows WORD, VIDEO or TriLevel if a synchronization
signal is detected at the input.
TC Out Mode
Use these buttons to set the timecode output mode.
GenOut button:
Timecode is output from the internal timecode
generator.
PlayOut button (default):
In timeline mode, the timecode time for playback and
recording is output. During playback in take and playlist
modes, the timecode recorded in the file is output.
Remote settings (REMOTE SETUP)
Make settings for the PARALLEL, RS-232C, RS-422, NETWORK
and FTP connectors on this screen.
The REMOTE SETUP screen has 6 pages: GENERAL, PARALLEL,
RS-232C, RS-422, NETWORK and FTP.
Touch the tabs at the bottom of the screen to open the corre-
sponding page.
GENERAL page
Make the external remote controller settings on this page.
FADER MODE
Allows the fader on an external TASCAM RC-HS20PD remote
controller (sold separately) to be enabled or disabled. When
set to Disable, the internal fader is fixed at 0 dB.
Setting buttons: Disable, Enable (default)
FADER Start MODE
Set whether or not fader starting, which allows you to start
playback by raising the fader from ∞ when in playback
standby, is enabled when the fader start function of an
external TASCAM RC-HS20PD remote controller (sold
separately), for example, is on.
Setting buttons: Disable, Enable (default)
FADER Stop MODE
Set whether or not fader stopping, which allows you to put
playback into standby by lowering the fader to ∞ during
playback standby, is enabled when the fader start function
of an external TASCAM RC-HS20PD remote controller (sold
separately), for example, is on.
Setting buttons: Disable, Enable (default)
NOTE
If both the FADER Start MODE and FADER Stop MODE items
are set to Disable, the fader start function of the external
TASCAM RC-HS20PD remote controller (sold separately) will
be turned off automatically, and the FADER START indicator
will turn off. In this state, if you touch the Fader Start key
on the TASCAM RC-HS20PD remote controller, a “Cannot
Change Now. Fixed in current mode” warning appears in a
pop-up window.
RC-HS20PD ONLINE KEY RECORD
This sets whether or not the ONLINE key of a TASCAM
RC-HS20PD remote controller (sold separately) can be used
for recording operations.
Setting buttons: Disable (default), Enable
NOTE
When this is set to “Enable”
Press the RC-HS20PD ONLINE key when stopped to put
the unit into recording standby. The RC-HS20PD ONLINE
key lights when in recording standby.
In recording standby, press the RC-HS20PD PLAY key to
start recording.
84


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam HS-20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam HS-20 in the language / languages: English as an attachment in your email.

The manual is 4,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info