617906
82
Zoom out
Zoom in
Previous page
1/128
Next page
82
TASCAM HS-20
10 – Internal settings
NOTE
A mark appears on the button of the currently active
master clock.
If synchronization from an external clock is interrupted,
the unit’s internal clock becomes active. In this case, the
mark appears on the INT button to show that it has become
the active clock, and the mark appears on the button of
the selected external clock that was lost.
SYNC page
Make settings related to synchronization on this page.
NOTE
If an optional SY-2 has not been installed, the items will be
shaded and cannot be set.
STATUS
Shows the current sampling frequency and clock synchroni-
zation status.
TC Chase
Use to turn playback synchronized with timecode ON or OFF
(default).
Set it to ON when you want to match the timing of this unit’s
audio with a timecode master device (audio recorder, video
or built-in timecode generator).
You can also set the timecode offset (TC Offset) to be used
with the timecode master device. Touch the EDIT button to
open the CHASE Offset screen where you can set the offset
value in a range between −23:59:59.29 and +23:59:59.29.
(Default: 00:00:00.00)
NOTE
TC Chase can also be turned ON and OFF by pressing the
SHIFT and CALL keys at the same time.
TC Rechase
When ON, this function re-synchronizes when synchroni-
zation with timecode becomes inaccurate during playback.
(Default: OFF)
When set to OFF, after synchronizing once, input timecode is
ignored and the unit operates in free run mode.
When set to ON, set the amount of inaccuracy that triggers
rechasing. To set the time, touch the knob, and adjust the
value using the DATA dial.
Select a value in frames of 1/3, 1, 2 (default), 5 or 10.
Master TC
Set whether the unit synchronizes with the built-in timecode
generator or with timecode input from another device.
Internal button: Synchronize with the built-in generator.
External button (default): Synchronize with timecode input
from another device.
T/C page
Make settings related to timecode on this page.
Set to free run
Set to jam sync (and free once)
NOTE
If an optional SY-2 has not been installed, the items will be
shaded and cannot be set.
STATUS
This shows the timecode generator mode of the unit and the
current timecode frame type.
GENERATOR
The top line shows the current timecode generator time.
The bottom line shows the user bits (UB).
82


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam HS-20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam HS-20 in the language / languages: English as an attachment in your email.

The manual is 4,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info