617906
80
Zoom out
Zoom in
Previous page
1/128
Next page
80
TASCAM HS-20
10 – Internal settings
OPTIONS page
Make settings related to the pre-recording and auto marks on
this page.
PreREC Time
Turn this function ON or OFF and set the length of pre-recording
time.
(Default: OFF)
When PreREC Time is ON, the signal input during recording
standby is captured by the built-in memory for the set amount
of time, allowing a maximum of 5 seconds to be recorded before
recording is started manually.
To set the pre-recording time, touch the knob, and adjust the
value using the DATA dial.
Setting range: 1–5 seconds (default: 2 seconds)
Auto mark
Make settings related to auto marks.
o Audio Over:
Use this to add markers when the set audio level is
exceeded.
Use this to add markers when the set level is exceeded.
Turn this function ON or OFF and set the detection level.
(Default: OFF)
To set the detection level, touch the knob, and adjust the
value using the DATA dial.
Setting values: –0.20 dB (default), –0.17 dB, –0.13 dB,
–0.10 dB, –0.06 dB, –0.03 dB.
Range: -0.10 dB to -0.06 dB (default: -0.03 dB)
Settings made here are reflected in the Over Level
setting on the METER SETUP screen.
o Time Interval:
Use this to add marks at fixed time intervals. Turn this
function ON or OFF and set the time interval. (Default:
OFF)
To set the time, touch the knob, and adjust the value
using the DATA dial. The setting range is 1–10 minutes
(default: 5 minutes). (default value)
o Sync Unlock:
Use this to add a mark when synchronization with
the master clock is lost. Turn this function ON or OFF.
(Default: OFF)
o PRE/REC/END:
Marks can be added automatically at the pre-record
start, recording start and recording end points. Turn this
function ON or OFF.
(Default: OFF)
NOTE
An "audio over" occurs when the level exceeds the maximum
level (full scale) minus the value set by the user.
(In the example above, this would be when the level exceeds
the maximum level minus 0.20 dB.)
NOTE
The PRE/REC/END auto marks are only added to takes in
take mode. They do not appear on the timeline in timeline
mode.
NOTE
After an Audio Over or Sync Unlock auto mark has been
placed, the same type of mark will not be repeated until at
least 10 seconds has passed.
Playback settings (PLAY SETUP)
Make playback settings on this screen.
GENERAL page
Make various settings related to the playback mode on this
page.
Play Mode
Set how the playback of takes and entries is handled using
the following buttons. This setting affects all modes except
timeline mode.
One Take button:
(default)
Only the currently selected take or
entry is played back.
All Take button: All the takes in the currently loaded
folder or all the entries in the
playlist are played back.
Repeat Mode
Turn repeat playback ON and OFF (default). (Default: OFF)
80


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam HS-20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam HS-20 in the language / languages: English as an attachment in your email.

The manual is 4,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info