617906

Tascam HS-20 Manual

87
Zoom out
Zoom in
Previous page
1/128
Next page
TASCAM HS-20
87
10 – Internal settings
Depending on the DNS SETUP setting, the appearance of
this area will change as follows.
When touching
When setting STATIC
When setting AUTO
LINK SPEED
Set the network connection speed.
o AUTO (default): Connects using a link speed
adapted automatically to the connection environment.
o 100M: Operates with a fixed link speed of 100 Mbps
Changing the IP Address, Subnet Mask, Default Gateway
and DNS Address settings
Touch the applicable area on the NETWORK page of the
REMOTE SETUP screen to open the corresponding setting
screen.
o Numbers are three digits.
(For those of two digits or less, you do not need to input
0 first.)
o The first digits are selected when the screen opens.
o If you touch the number button for the first number after
entering selection mode, only that number will be input.
After this, other numbers can be input like on a calculator.
o Touch the dot (.) button to move the selection to the next
number.
Example:
Shown on screen 192. 168. 1. 1
Input 1234 234. 168. 1. 1
(The first “1” is pushed
out.)
Input “ . ” 234 168. 1. 1
Changing the password setting
Touch the Change button located near Password on the
NETWORK page of the REMOTE SETUP screen to open
the CHANGE PASSWORD screen where you can set the
password.
Up to nine characters can be entered.
FTP page
Make settings related to the FTP client function.
Target FTP Server
Set the FTP server to be connected.
Touch it to open a setting screen.
o FTP Address:
Set the address of the FTP server to be connected.
o Folder Name
Set the default folder for uploading to the FTP server and
downloading from FTP.
o User ID
Set the user ID used to connect to the FTP server.
o Password
Set the password used to connect to the FTP server.
o Access Test
Touch this button to test the connection with the set FTP
server. A pop-up message with the result will be shown.
Auto Upload Mode
Set whether or not files that have completed recording are
automatically uploaded to the FTP server.
o Disable (default): Files will not upload automatically.
o Enable: Files will upload automatically.
… 87 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam HS-20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam HS-20 in the language / languages: English as an attachment in your email.

The manual is 4,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info