617907
94
Zoom out
Zoom in
Previous page
1/132
Next page
94 TASCAM HS-2
T/C page
Make settings related to time code on this page.
Set to free run
Set to jam sync (and free once)
NOTE
If the Option SY-2 has not been installed, the display is
shaded and the setting cannot be selected.
STATUS
This shows the time code generator mode of the unit and
the time code frame type of the currently loaded project.
GENERATOR
The top line shows the current time code generator.
The bottom line shows the user bits (
UB
).
Touch the
GENERATOR
item
EDIT
button or the user bits
(
UB
) display area to open the
T/C USER BITS
screen.
When the time code generator is in free run mode, touch
the
RESTART
button to reset the time code of the time
code generator to the start time.
TC IN
The top line shows the time of the input time code and
the frame type. The bottom line shows the user bits (
UB
)
of the input time code.
In
FREE RUN
mode, touch the
CAPTURE
button to capture
the current time code and set it as the time code of the
time code generator.
If the time code generator mode is
FREE ONCE
or
JAM
SYNC
, the capture status (
WAITING
) indicator lights green
when waiting for time code, and it turns off after time
code is captured.
START TIME
When you touch the
GENERATOR
item
RESTART
button,
the time when the time code restarts is shown.
Touch the
START TIME
item
EDIT
button or the
START
TIME
display area to open the
START TIME
screen.
SETUP page
Make settings related to the time code generator on this
page.
STATUS
This area shows the currently loaded projects time code
frame type.
TC GEN MODE
Use the buttons to set the time code generator mode.
NOTE
If the Option SY-2 has not been installed, the display is
shaded and the setting cannot be selected.
FREE RUN button:
The time code generator runs on its own.
FREE ONCE button (default):
After the input time code is captured once, the unit
starts free run mode.
TIME OF DAY button:
If you conduct any of the following operations, the
time will be captured from the internal clock and
free run mode will start.
Turn the power on
• Set
TC GEN MODE
to this mode
• Reset the internal clock
JAM SYNC button:
When time code is input, the unit synchronizes to it.
If time code input is interrupted, the unit enters free
run mode.
REGEN button:
The unit synchronizes to the input time code.
REC RUN button:
The time code generator only functions during
recording. At all other times, the time code
generator stops.
10–Internal settings
94


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam HS-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam HS-2 in the language / languages: English as an attachment in your email.

The manual is 4,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info