617907

Tascam HS-2 Manual

93
Zoom out
Zoom in
Previous page
1/132
Next page
TASCAM HS-2 93
D-IN button:
Synchronize with the clock of the digital signal
selected as the input for DIGITAL IN.
You cannot select an input as the master clock if the
sampling rate converter is ON for that input.
On the second line of the button, the digital input
signal selected is shown.
NOTE
•
A mark appears on the button of the currently
active master clock.
•
If synchronization from an external clock is interrupted,
the unit’s internal clock becomes active. In this case,
the mark appears on the
INT
button to show that it
has become the active clock, and the mark appears
on the button of the selected external clock that was
lost.
SYNC page
Make settings related to synchronization on this page.
NOTE
If the Option SY-2 has not been installed, the display is
shaded and the setting cannot be selected.
STATUS
Shows the status of the currently loaded project’s
sampling frequency and clock synchronization.
TC Chase
Use to turn playback synchronized with timecode
ON
or
OFF
(default).
Set it to
ON
when you want to match the timing of
this unit’s audio with a timecode master device (audio
recorder, video or built-in time code generator).
You can also set timecode offset (TC Offset) with the
timecode master device. Touch the
EDIT
button to
open the
CHASE Offset
screen where you can set the
offset value in a range between −
23:59:59.29
and
+
23:59:59.29
(default:
00:00:00.00
).
NOTE
TC Chase
can also be turned
ON
and
OFF
by pressing the
SHIFT and CALL keys at the same time.
TC Rechase
Turn this function, which re-synchronizes when synchro-
nization with timecode becomes inaccurate,
ON
or
OFF
(default).
When set to
OFF
, after synchronizing once, input time
code is ignored and the unit operates in free run mode.
When set to
ON
, set the amount of inaccuracy that triggers
rechasing.
To set the amount of inaccuracy that triggers rechase,
touch the knob and turn the DATA dial to select a value in
frames of
1/3
,
1
,
2
(default),
5
or
10
.
Master TC
Set whether the unit synchronizes with the built-in
timecode generator or with timecode input from another
device.
Internal button:
Synchronize with the built-in generator.
External button (default):
Synchronize with timecode input from another device.
10–Internal settings
… 93 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam HS-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam HS-2 in the language / languages: English as an attachment in your email.

The manual is 4,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info