617907
92
Zoom out
Zoom in
Previous page
1/132
Next page
92 TASCAM HS-2
Auto Ready
Turn the auto ready function
ON
or
OFF
(default).
If auto ready is
ON
, when playback of a take completes the
unit automatically stops at the beginning of the next take.
This setting affects all modes except timeline mode.
Inc. Play
Turn the incremental play function
ON
or
OFF
(default).
When incremental play is
ON
, press the PLAY key during
playback to move to the beginning of the next take and
continue playing, or press the STOP (RETAKE) key during
playback to move to the beginning of the next take and
pause playback.
This setting affects all modes except timeline mode.
PLAY Inhibit Time
This sets a time interval during which playback of the
same take (entry) cannot be restarted.
The following keys and commands are disabled (excluding
flash start keys/commands for other takes/entries) for the
duration of this setting. The following keys and commands
are disabled (excluding flash start keys/commands for
other takes/entries) for the duration of this setting. The
PLAY key on the front panel of the unit, the PLAY key,
flash start keys and fader start function of the TASCAM
RC-HS20PD remote control (sold separately), and play and
flash start commands from external controllers (RS-232C/
RS-422/ Parallel/ Keyboard).
Setting range:
01000
msec (100 msec intervals),
Inf
(during playback the affected keys are disabled for this
amount of time)
Default value:
0 msec
NOTE
When the
PLAY Inhibit Time
item is set to
Inf
, the
incremental play function is automatically fixed to OFF
and cannot be switched to ON.
Sync and time code settings (SYNC T/C)
Make various settings related to audio synchronization
and time code on this page.
This screen has five pages:
CLOCK
,
SYNC
,
T/C
,
SETUP
and
I/O
. Touch the tabs at the bottom of the screen to open
the corresponding page.
CLOCK page
View various clock status information and select the clock
used for synchronization.
STATUS
Project:
Displays the sampling frequency of the project.
CLOCK:
Displays the clock synchronization status.
WORD/VIDEO:
Displays
WORD
,
VIDEO
or
TriLevel
if such a signal
is detected at the input.
D-IN:
Displays the digital input signal status as shown in
the following table:
Digital input signal status Display
Locked
Locked (xx.xxx kHz)
When sampling rate conversion
is ON
L o c ke d (x x.xx x kHz
FsCnv)
Unlocked
Unlocked (xx.xxx kHz)
No signal
Unlocked (no signal)
No audio signal present
Not Audio
Other Cbit information differs
from the actual operation mode
Unmatched Cbit
MASTER
Use the buttons to select the master clock to use.
INT button (default):
Use this unit’s internal clock.
WORD button:
Synchronize with the word clock input through the
WORD/VIDEO IN connector.
VIDEO button:
Synchronize with the video clock input through the
WORD/VIDEO IN connector.
10–Internal settings
92


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam HS-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam HS-2 in the language / languages: English as an attachment in your email.

The manual is 4,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info