617901
11
Zoom out
Zoom in
Previous page
1/64
Next page
TASCAM DA-6400/DA-6400dp
11
2 – Names and Functions of Parts
a SHIFT button
o When the Home Screen is open, press the MULTI JOG
dial while pressing and holding this button to show a
white frame in the meter section, and turn the MULTI JOG
dial to select the audio channel to be output from the
PHONES jack.
o When the Home Screen is open, press and hold the MULTI
JOG dial while pressing and holding the SHIFT button to
switch the headphone monitoring mode between STEREO
and MONO. (See “Setting headphones monitoring mode”
on page 20.)
o When the meter mode setting is 32ch, press the HOME
[METER] button while pressing and holding this button
to switch between showing level meters for channels 1-32
and 33-64 on the Home Screen. (See “Setting the meter
mode” on page 53.)
o Press the INFO button while pressing and holding this
button to open the
MARK INFO
page.
o Press the MENU button while pressing and holding this
button to open the menu pages in the opposite direction.
o When an audio output channel is selected on the Home
Screen, when a channel is selected for setting changes on
the
REC FUNCTION
or
INPUT MONITOR
screen, or
when a folder is selected on the
BROWSE
screen, turn the
MULTI JOG dial while pressing and holding this button to
move the cursor by large amounts.
When stopped, in playback standby or playing back.
o Press this button while pressing and holding the .
[MARK .] button to move to the previous mark and
resume the previous state.
o Press this button while pressing and holding the /
[MARK /] button to move to the next mark and
resume the previous state.
Rear panel
8
DA-6400 rear panel
8
DA-6400dp rear panel
s SLOT 2
Use this slot to install an I/O card (sold separately).
d SLOT 1
Use this slot to install an I/O card (sold separately).
f TIMECODE IN connector
This BNC connector is for the input of SMPTE timecode.
g TIMECODE OUT connector
This BNC connector is for the output of SMPTE timecode.
h WORD/VIDEO THRU/OUT connector
This BNC connector is for the output of word clock and video
reference signals.
This connector outputs word clock signals (thru or 44.1, 48,
88.2 or 96 kHz) and video reference signals (signal thru from
IN jack).
j WORD/VIDEO IN connector
This BNC connector is for the input of word clock and video
reference signals. Use this connector to input word clock
signals (44.1, 48, 88.2 or 96 kHz) and video reference signals
(NTSC/PAL blackburst and HDTV tri-level).
k ETHERNET connector
This is an Ethernet port. Use this to connect to a network,
transfer files and control the unit externally.
l RS-422 terminal
This is a 9-pin D-sub RS-422 serial control terminal.
Connect an external controller here.
; PARALLEL connector
This is a 15-pin D-sub parallel control terminal.
Connect an external controller here.
z Heat dissipation fan
This fan is to prevent the unit from overheating. Do not
allow anything to block the fan and prevent the dispersion
of heat.
x AC IN connector (DA-6400 only)
Plug the included power cord in here.
c AC IN A/B connectors (DA-6400dp only)
Plug the included power cords in here.
To operate the unit with power supply redundancy, connect
power supplies to both the AC IN A and AC IN B connectors.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam DA-6400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DA-6400 in the language / languages: English as an attachment in your email.

The manual is 1,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info