617901

Tascam DA-6400 Manual

13
Zoom out
Zoom in
Previous page
1/64
Next page
TASCAM DA-6400/DA-6400dp
13
2 – Names and Functions of Parts
7 Remaining media capacity
This shows the remaining available recording time of the
current media.
No Media
is shown when no SSD/HDD drive is loaded.
UNFORMAT
is shown if the loaded SSD/HDD drive has not
been formatted.
Rec Limit
is shown if recording is not possible because
the total number of folders, takes inside folders and other
files would exceed the system limit.
8 Timecode status
When the
TC GENERATOR MODE
screen is not set to
TC SYNC REC
.
The TC indicator lights green when correct
timecode is being input and recognized
properly.
The indicator does not light when input
timecode recognition is abnormal.
When the
TC GENERATOR MODE
screen is set to
TC
SYNC REC
.
The TC indicator lights red when correct
timecode is being input and recognized
properly.
§
The indicator flashes red when input
timecode recognition is abnormal.
9 Audio synchronization status
The name of the currently selected master clock is shown
with the indicator. (See “Setting the master clock” on page
22.)
When synchronized with the master clock,
the indicator lights green.
§
When not synchronized with the master
clock, the indicator blinks.
0 Time bar
This shows the current playback position. What is shown
depends on the time display mode.
Time
display
mode
Meaning Bar display
The current playback
position is shown relative
to the length of the take.
Lengthens from the
left end toward the
right end.
Shortens from the left
end toward the right
end.
The current playback
position is shown relative
to the length of all takes
in the folder.
(Vertical white lines show
divisions between takes.)
Lengthens from the
left end toward the
right end.
Shortens from the left
end toward the right
end.
The current playback
position is shown relative
to the length of the take.
Lengthens from the
left end toward the
right end.
NOTE
During recording, a progress bar appears to extend from the
left end to the right end about every 10 seconds.
q Take name
This shows the name of the currently loaded take.
w Level meter display area
This area shows the levels of the input and playback signals.
When a level overloads, the bar meter becomes red and the
channel number appears in a pop-up above it.
e Solo selection frame
The level meter for the channel currently output from the
PHONES jack is shown with a white or gray frame. When the
selection frame appears white, turn the MULTI JOG dial to
select the channel output from the PHONES jack.
Press the MULTI JOG dial while pressing and holding
the SHIFT button to switch the headphone output solo
selection frame to white/gray.
When the
PHONES MONITOR MODE
screen setting is
MONO, the solo selection frame will be for a mono channel.
(See “Setting headphones monitoring mode” on page 20.)
r Record function indicators
These show whether recording is enabled or not for each
channel.
Recording enabled: Red
Recording disabled: Gray
t Marks
An b icon is shown at each mark.
y Mark name
This shows the name of the mark at or immediately before
the current time.
u Level meter guide
This level meter guide can be used to evaluate input and
output levels.
This line is shown at −18 dB.
The position of the guide and the value (t 18 g) shown
depend on the value set on the
REFERENCE LEVEL
screen. (See “Setting the reference level” on page 23.)
i Input monitoring indicator area
These show whether input monitoring is enabled or not for
each channel.
Input monitoring on: Blue
Input monitoring off: Unlit
NOTE
When the sampling frequency is 88.2/96 kHz, the following
data in the area for channels 33–64 is not shown.
i Level meters
i Record function indicators
i Input monitoring indicators
Furthermore, the solo selection frame cannot be moved to
channels 33–64.
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam DA-6400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DA-6400 in the language / languages: English as an attachment in your email.

The manual is 1,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info