617901
12
Zoom out
Zoom in
Previous page
1/64
Next page
12
TASCAM DA-6400/DA-6400dp
2 – Names and Functions of Parts
Note about the PARALLEL connector
The PARALLEL connector on the back of the unit allows
external control of it.
You can set the functions of the PARALLEL connector on the
PARALLEL INPUT
and
PARALLEL OUTPUT
pages. (See
“PARALLEL connector settings” on page 38.)
The factory default pin assignments are as follows.
Pin No. I/O Function (default value)
1 O OUTPUT AUX1 (STOP TALLY)
2 O OUTPUT AUX2 (REC TALLY)
3 I INPUT AUX1 (TAKE SKIP +)
4 I INPUT AUX2 (TAKE SKIP −)
5 O OUTPUT AUX3 (ERROR TALLY)
6 I INPUT AUX3 (FADER REC)
7 I INPUT AUX4 (REW)
8 GND
9 O OUTPUT AUX4 (PLAY TALLY)
10 O OUTPUT AUX5 (PAUSE TALLY)
11 I INPUT AUX5 (F.FWD)
12 I STOP
13 I PLAY
14 I INPUT AUX6 (PAUSE)
15 +5V
I: For command input and transport control
Internal circuit with +5V pull-up
Operates with low signal input of 50 msec or longer
When INPUT AUX is set to FADER REC, low signal input
starts recording and high signal input stops recording.
When INPUT AUX is set to FADER START, low signal input
starts playback and high signal input pauses playback.
O: For command and tally output
Internal circuit is open collector (10Ω output impedance)
Outputs low command during operation
20V dielectric strength, 35mA maximum current
+5V: 50mA maximum supplied current
The following example is of a connection that controls recording
and playback of this unit by level, using fader starts and stops
and FADER REC commands.
START
STOPSTOP
Pin 8 : GND
Pin 6 : REC
NOTE
Setting multiple FADER REC and FADER START settings to
INPUT AUX is not possible.
Home Screen
The following information is shown on the unit's display.
1 Transport status
This icon shows the current transport status.
Icon Meaning
Playing back
In playback standby
Stopped
Searching backward
Searching forward
Searching backward (high speed)
Searching forward (high speed)
Recording
In record standby
2 Repeat status
When repeat playback is off, the icon is unlit.
When repeat playback is on, the icon is lit.
3 Solo status
When the solo selection frame is white, the icon blinks.
4 Take number
This shows the number of the take playing or being
recorded.
5 Time counter
This shows the elapsed recording/playback time of the take
or the timecode time.
6 Time display mode
This icon shows the current time display mode.
Time
display
mode
Meaning
This shows the elapsed time from the beginning
of the take.
This shows the remaining time until the end of
take. When recording, this shows the remaining
time until the maximum file size is reached.
This shows the total take elapsed time.
During playback, this shows the total take
remaining time. When recording, this shows the
remaining available recording time.
This shows the timecode time of the recording/
playback take.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam DA-6400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DA-6400 in the language / languages: English as an attachment in your email.

The manual is 1,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info