617901
9
Zoom out
Zoom in
Previous page
1/64
Next page
TASCAM DA-6400/DA-6400dp
9
2 – Names and Functions of Parts
Front panel
8
DA-6400 front panel
8
DA-6400dp front panel
1 STANDBY/ON switch
Use to turn the unit on and to put it into standby.
Press and hold it when the power is on to open a pop-up
message confirming that you want to put the unit into
standby.
When the pop-up is open, press and hold the MULTI JOG
dial to put the unit into standby.
CAUTION
Before turning the unit on, lower the volumes of connected
equipment to their minimum levels. Failure to do so could
result in a sudden loud noise that could harm hearing, for
example.
2 SSD/HDD SLOT
Use this bay to insert and remove SSD/HDD cases. (See
“Loading and removing SSD/HDD cases” on page 17.)
CAUTION
Do not remove the SSD/HDD case from the unit when the
SSD/HDD is being accessed (during recording, playback,
when data is being written or at other times when the SSD/
HDD case indicator is blinking orange).
3 RELEASE switch
Slide the RELEASE switch toward > to unlock the loaded
SSD/HDD case so that it can be removed.
4 Color display
Shows a variety of information.
5 INFO button and indicator
The INFO indicator lights blue when the unit is functioning
properly.
The INFO indicator lights red when an error or warning has
occurred with the unit.
Press this button when the INFO indicator is lit blue to show
the unit's operation status on the display. Press this button
when the INFO indicator is lit red to show the message on
the display. (See “INFO button and indicator appearance on
page 51.)
Press this button while pressing and holding the SHIFT
button to open the
MARK INFO
screen. (See “Using
marks” on page 45.)
6 HOME [METER] button
o Press when the Home Screen is open to change the time
display mode.
o When a Menu Screen is open, press this button to return
to the Home Screen.
o While pressing and holding this button, turn the MULTI
JOG dial to adjust the brightness of the color display and
the various indicators. (See Adjusting the brightness” on
page 19.)
o While pressing and holding this button, press and turn the
MULTI JOG dial to adjust the brightness of just the color
display. (See Adjusting the brightness” on page 19.)
o When the meter mode setting is 32ch, press this button
while pressing and holding the SHIFT button to switch
between showing level meters for channels 1-32 and
33-64 on the Home Screen. (See “Setting the meter mode”
on page 53.)
7 MULTI JOG dial
This dial functions both as a dial when turned and as a
button when pressed.
Dial functions
o When the white solo selection frame is shown on the
Home Screen, turn the MULTI JOG dial to move the solo
selection frame for headphone output left and right to
select the channel(s) output from the PHONES jack.
o When the gray solo selection frame is shown on the Home
Screen, turn the MULTI JOG dial to move between marks
in the current take. When there are no marks, turn to skip
between takes.
o When a Menu Screen is open, turn to select items and
change setting values.
o When editing names, use to select characters.
o While pressing and holding the HOME [METER] button,
turn the MULTI JOG dial to adjust the brightness of the
color display and the various indicators.
o While pressing and holding the HOME [METER] button,
press and turn this dial to adjust the brightness of just the
color display.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam DA-6400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam DA-6400 in the language / languages: English as an attachment in your email.

The manual is 1,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info