Manual Tascam cdrw900 (page 19 of 32) (English)

161727

Zoom out

Zoom in

1/32

TASCAM CD-RW900 19

Pitch control function

A to B repeat playback

If a specic portion between two points on the disc is

specied, that portion can be played back repeatedly.

1 During playback, press the A-B key on the remote

control at the beginning of the desired portion on the

disc.

REPEAT

indicator lights up in the display and the

A-

indicator will ashes.

2 At the end of the desired portion on the disc, press

the A-B key again.

Then,

REPEAT

and

A-B

indicator light up in the dis-

play, and the desired A-B section will be played back

repeatedly.

NOTE

You can also operate this function during playback

standby.

3 To cancel the A-B repeat mode and resume normal

playback, press the A-B key once again.

REPEAT

and

A-B

indicator will turn off.

NOTE

≠

A-B repeat mode cannot function

For MP3 discs.

≠

In Random and Program modes, A-B repeat cannot

function when the specied A-B section spans more

than one track, and does not function for MP3 discs.

≠

When the STOP key is pressed, the specied A-B

section is cancelled.

When playing back an audio CD, the pitch (or speed)

of the playback can be varied. Pitch can be varied +/-

16%.

1 During stop, press the PITCH key on the remote

control to turn on the Pitch control function.

Or, use the PITCH option in the PLAY sub-menu to

turn on (refer to “Operation basics” on page 14)

The current pitch value appears on the display for

seconds and the

PITCH

indicator will light up.

2 Press the MENU key and select the PITCH CONT

option in the PLAY sub-menu to set the desired

value and push the MULTI JOG dial to enter.

Pitch>XXX

will appear on the dispaly.

Then, rotate the MULTI JOG dial to set the desired

value.

NOTE

Use the PITCH STEP option in the PLAY sub-menu to

adjust the pitch value steps from 0.1% to 1.0% in 0.1%

increments (default: 0.1%)

3 Press the MENU key or push the MULTI JOG dial to

enter and return to normal mode.

During playback, the pitch control playback can be

off temporally. Press the PITCH key on the remote

control or use the PITCH option in the PLAY sub-

menu to turn the function off.

Pitch>OFF

appears on the display and the pitch

control playback will be off temporally, until the func-

tion is re-set again.

To resume the pitch control playback, press the

PITCH key again or use the PITCH option.

NOTE

≠

When turning the pitch control on and off during

playback, sound output is cut for a short instant.

≠

Pitch control cannot be applied for MP3 discs.

Key control function

The key of the music can be changed during stop, play-

back or playback standby mode. However, please note

that this feature does not operate with MP3 discs.

1 Press the MENU key to select the KEY option in the

PLAY sub-menu (refer to “Operation basics” on page

14) to enter the function.

The

KEY

indicator will light up.

2 Call up the KEY LEVEL option in the PLAY sub-

menu to adjust the playback key level.

The playback key can be raised or lowered 1/2 oc-

tave in half-tone increments. Selection values: 0 (no

change),

1 to

3 Rotate the MULTI JOG dial to select the desired key

level and push to enter.

NOTE

≠

In this condition, when a CD is played back, the key

of the music is changed while the speed of the mu-

sic remains the same.

≠

Even when the power is turned off, the key change

setting is retained.

≠

When the Key control function is on, even if the

Pitch control function is used to change the play-

back speed, the key of playback will remain xed at

the preset key {even if the key level is 0 (zero)}, the

Key control function can be turned on.

≠

When using the key control function, playback

sound may occasionally sound as vibrating. This is

a result of a special process applied to CD playback

sound and is normal.

4−Playback operations

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Tascam cdrw900 in the language / languages: English as an attachment in your email.

The manual is 2,15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Tascam cdrw900 Manual

Product: