161727
17
Zoom out
Zoom in
Previous page
1/32
Next page
1-Introduction
TASCAM CD-RW900 17
Playback modes
There are four different playback modes. The selected
mode will be indicated on the left of the display.
Continuous playback mode (default setting): no indi-
cation lamp
Single playback mode:
SINGLE
lamp is lit
Program playback mode:
PROGRAM
red lamp is lit
Random playback mode:
RANDOM
red lamp is lit
The playback mode can be selected using the PLAY
MODE key on the remote control unit. Pressing the key
changes the playback mode on the display in the fol-
lowing order:
Continue
®
Single
®
Program
®
Random
You can also select the playback mode using the PLAY
MODE option in the PLAY sub-menu (refer toOpera-
tion basics on page 14). Turning the MULTI JOG dial
clockwise changes the playback mode shown on the
display in the following order:
Mode>Cont
®
Mode>Single
®
Mode>Program
®
Mode>Random
Pressing the MENU key or pushing the MULTI JOG
dial returns to normal mode from the menu mode.
While the mode can be changed from any playback
mode, the explanation in this manual will assume the
user is starting from the Continuous mode.
NOTE
The selected playback mode remains after power is
turned off. However, the setting of program playback
mode will be deleted when power is turned off.
4−Playback operations
Single-track playback
This function enables playback of just a single track.
1 During stop, set the
Single
or the
Mode>Single
mode.
2 Use the SKIP key or the number keys (0~9) on
the remote control to select the desired track.
The MULTI JOG dial can be used to select the
track also.
3 Press the PLAY key to begin playback.
After the selected track nishes, playback stops.
Continuous playback
Programing is cancelled, and playback continuous in
the normal order.
1 During stop, set the
Continue
or the
Mode>Cont
mode.
2 Press the PLAY key to begin playback in order of
the track number.
Program playback
This function enables playback of selected tracks in any
desired order. Up to 99 tracks can be selected for pro-
gram playback.
1 During stop, set the
Program
or the
Mode>Program
mode.
2 Use the number keys (0~9) on the remote control
unit to select each desired track for program play-
back, then press the ENTER key.
You can also rotate the MULTI JOG dial to select
the track number and push to enter.
The track number will be entered into the program.
Repeat the above step 2 until the desired program is
completed. As the program is being created, the pro-
gram number and total program playing time is revised
on the display.
NOTE
If the CLEAR key is pressed, the programmed track will
be deleted from the last.
3 When program setting is completed, press the
PLAY key to begin playback of the tracks in the pro-
grammed order.
NOTE
If the STOP key is pressed without rst pressing the
PLAY key, all the program data will be erased.
During stop, if the playback mode is switched to an-
other, all the program data will be erased.
The programmed play order is not memorized when
power is turned off.
In this mode, if any track is not programed, the CD-
RW900 will not start playback.
If an attempt is made to enter more than 100 pro-
gram steps, the message
PGM Full!
appears on the
display.
If the total program playing time exceeds 999 min 59
sec, --- : -- appears on the display.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam cdrw900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam cdrw900 in the language / languages: English as an attachment in your email.

The manual is 2,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info