161727
16
Zoom out
Zoom in
Previous page
1/32
Next page
16 TASCAM CD-RW900
Track search
1 Press the
/ ˚
search key continuously on the
front panel, or the SEARCH
/ ˚
key on the
remote control.
2 To stop the search function, simply release the
/ ˚
or the SEARCH
key.
NOTE
The search function does not operate with MP3 discs.
Normal search
Direct search
Operation variations
Even if the final second is not input, playback will begin
from the selected point after pressing the ENTER or
PLAY key. Or, if you press the READY key, the unit will
enter the playback standby mode at the selected point.
Specifying a track number only
After inputting the track number, press the ENTER
or PLAY key to begin playback of that track, or the
READY key to cue the track and enter playback
standby mode.
NOTE
Instead of inputting the three-digit track number, you
can input only the desired track number.
Example: To specify track 3, input only “3”.
Specifying to the minute
After inputting the three-digit track number and the
number of minutes after the start of the track, press
the ENTER or PLAY key to begin playback of that
track, or the READY key to cue the track and enter
playback standby mode.
Example: To specify 1 min 00 sec from the start of
track 2, input “002 001”
NOTE
Following the above example, if 0021 is input, the
same position will be located.
By specifying time from the start of a certain track, you
can start playback from a specified point of a specified
track.
Basic operation
1 During stop, play or playback standby modes, use
the number keys on the remote control to input the
three-digit track number (such as 002 for track 2),
then the desired elapsed time (***min **sec) from the
start of that track.
Example: To specify 1 min 30 sec from the start of
track 2, input “002 001 30”.
During input, the counter in the display will flash.
Pressing the CLEAR key cancels the input at any
stage during input.
NOTE
Regardless of the time display mode (refer to “Time dis-
play switching on page 18), the time from the start of
the specified track is displayed.
During stop or playback modes, when the final digit
is entered, the desired position is automatically lo-
cated and playback will begin from the desired point.
During playback standby mode, at the desired point
the unit will enter playback standby mode.
NOTE
If a point which does not exist is entered, setting op-
eration will be cancelled.
4−Playback operations
Using the number keys on the remote control, the num-
ber of the desired track can be entered directory. Even
numbers with two or three digits can be entered easily.
For example:
Track 9: press ‘9’ and 009 will be displayed.
Track 12: press ‘1’ and ‘2’ and 012 will be displayed.
Track 103: press 1 and 0 and 3 and 103 will be
displayed.
After input, press the PLAY key to start playback. Or,
the READY key to cue the track at its head position
and enter playback standby mode.
You can also enter the track number and start playback
by pushing the MULTI JOG dial or using the ENTER
key.
NOTE
This function cannot be used in Program or Random
mode.
Selecting by track number
The direct search function cannot be used in pro-
gram or random mode.
For MP3 discs, time cannot be specified within a
track. However, if you input the three-digit track
number, playback will begin from the start of that
track.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam cdrw900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam cdrw900 in the language / languages: English as an attachment in your email.

The manual is 2,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info