161727
30
Zoom out
Zoom in
Previous page
1/32
Next page
30 TASCAM CD-RW900
Troublshooting
Symptom Possible cause and remedy
There is no power to the unit. Please check the power cord is properly plugged in.
“Disc Error!” is displayed. The disc may be dirty. Please replace the disc.
Playback is not possible. This may be due to condensation. In this case, remove the disc, turn the
power on and wit a few hours, then try again.
No sound is output. Conrm the connections with the audio system.
Check the volume level, and proper amplier operation.
Recording is not possible. Conrm the connections with the audio system.
Adjust the recording level.
The disc may be for playback only. Please replace with a recordable disc.
Noise or static can be heard. Please re-position the unit away from strong source of magnetism such as a
television.
The CD-RW900 does not retain
settings.
While settings are retained each time they are made, in some cases they will
not be retained when the power is turned off too soon. To prevent this from
happening, do not turn off the power right after making a setting.
Error messages
Message Details / response
Can’t Rec!
Cannot record. Either erase the contents of the disc (for a CD-RW), or use a different recordable disc.
Disc Error!
The disc has malfunctioned. Please replace with a new disc.
Disc Full!
No recording time remaining, or no recordable track is left on the disc.
Text Full!
No space to input the letters.
Sure? Text!
The text data is not written on the disc yet. Open the tray to cancel the text you enter or operate nal-
ization to write the data on the disc.
Drive Error!
There is a problem in the drive.
D-IN UNLOCK!
The digital input is not connected. Turn on the power of the equipment connected to DIGITAL IN.
Not Audio!
There is no audio signal from DIGITAL IN.
Erase Error!
An error occurred while erasing.
Not Fs44.1k!
The sampling frequency of the digital input is not 44.1 kHz. Please turn the SRC on.
PGM Empty!
There is no program.
PGM Full!
Now new programs can be created.
Can’t Edit!
Editing cannot be performed due to operational restrictions.
Can’t sel!
Menu selection cannot be performed due to selection prohibitions.
Rec Error!
There was an error during recording. Please re-record.
No DIR!
There is no directory that contains a le.
Decode Err!
The MP3 le cannot be played back.
Format Err!
The disc has been formatted that the CD-RW900 cannot read.
Messages during operations
Message Statement
Blank Disc A blank recordable disc has been inserted.
Complete An operation such as nalize or erase has been successfully completed.
Now OPC
(OPC=Optium power Control)
Calibration is being performed to operate recording properly.
Disc Repair The disc failed to write PMA is being repaired, and this operation will be a long-
running. Please do not turn off the power of the CD-RW900 during this operation.
PMA Writing
(PMA=Program memory Area)
The recorded content is being written to the disc.
TOC reading The table of contents data is being read.
8-Reference and specifications
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam cdrw900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam cdrw900 in the language / languages: English as an attachment in your email.

The manual is 2,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info