782760

SureFlap Microchip Cat Flap Connect Manual

20
Zoom out
Zoom in
Previous page
1/388
Next page
19
accessory
Fitting your Cat Flap in glass
Tools and supplies required
Ruler Cross head screwdriver Cat Flap Mounting Adaptor
Glazier Clear all-weather sealant The screws and screw caps provided
Installation video tutorials (English speaking) can be found at
surepetcare.com/support
Step-by-step guide for cutting the hole in glass
If you do not have a hole in your glass door to fit the Cat Flap you will need to
contact a glazier to visit your home and measure up for the new pane of glass.
In most cases it is not possible to cut a pane of glass in situ, especially if you have
a double or triple glazed unit.
Before you begin, have you added all of your pets? If not, see page 9.
1
To fit your Cat Flap into glass, you will require a circular hole
to be cut measuring 212mm (8 ") in diameter. This will
need to be done by a professional glazier. To ensure your cat
has unhindered access through the Cat Flap, you will need
to make sure that this circular hole is cut at the appropriate
height. Do this by first measuring the height from your
cat’s tummy to the floor.
2
Take this height and add 56mm (2 ") to it, this will give
you the total distance from the floor to the centre of the
circle you need cutting. Make sure this point is at least
200mm (7 ") from the bottom of the window frame
to allow room for the mounting adaptor.
H = cat’s tummy height + 56mm = the centre of the circle.
212mm
HH
3
If you are fitting in a double or triple glazed unit, the glazier
should use a non-metallic spacer bar around the hole,
as a metal spacer could aect the Cat Flap’s ability to read
microchips. (The spacer bar is needed to fill the gap between
the panes of glass.)
When working with cut glass always wear protective gloves as the edges may be
sharp.
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for SureFlap Microchip Cat Flap Connect at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of SureFlap Microchip Cat Flap Connect in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 17.89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info