Manual SureFlap Microchip Cat Flap Connect (page 18 of 388) (English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish, Finnish)

782760

Zoom out

Zoom in

1/388

Fitting your Cat Flap in a door

Tools and supplies required

Ruler Sharp pencil Electric drill with a 6mm (") drill bit

Spirit level Electric jigsaw Cross head screwdriver

Blu Tack Protective eye-wear The screws and caps

Installation video tutorials (English speaking) can be found at

surepetcare.com/support

Step-by-step guide

Before you begin, have you added all your pets? If not, see page 9.

To ensure your cat has unhindered access through the Cat Flap,

measure the height from their tummy to the floor. Mark this

height on your door, as this is where the bottom of the hole

should be cut through the door.

Attach a ball of Blu Tack (or similar adhesive putty) to each

rear corner of the external frame so that you can stick it to

the door and use it as a template.

Stick the external frame to the door using the mark you made

for the height of your cat’s tummy to align the bottom edge

of the hole. Use a spirit level to ensure the frame is level,

then run a sharp pencil around the inside edge of the frame.

When using power tools, please follow all safety instructions provided with the

product.

Now it’s time to prepare for cutting. We strongly advise that

you drill large holes in all the corners of the outline to make

it easier to cut the hole with a jigsaw. Make sure these holes

are touching the line and that they are big enough for

the blade of the jigsaw to fit through.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of SureFlap Microchip Cat Flap Connect in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 17.89 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

SureFlap Microchip Cat Flap Connect Manual

Product: