782760

SureFlap Microchip Cat Flap Connect Manual

19
Zoom out
Zoom in
Previous page
1/388
Next page
18
EN
5x
Using the jigsaw, cut around the outer edge of the line you
have marked. By doing this, the Cat Flap should fit through
the hole first time. However, if you cut on, or inside the line,
the hole is likely to be too small. If this is the case, please take
the time to carefully file the hole until the Cat Flap fits through
easily.
Once the main hole is cut, check whether there is any metal within your door.
If you can see metal, go to page 21 and follow the instructions for fitting in
a metal door.
6
Now check that the Cat Flap fits through the hole. Remember
the SureFlap logo must be inside the house. We advise that
you have two people for this, one inside the house and one
outside to help hold the product firmly in place.
7
On the outside of the house, make sure the tunnel of the
Cat Flap is securely pushed through the hole and then slide
the external frame over it. When the external frame is in
place, using a sharp pencil mark through the two holes.
8
Remove the external frame and the Cat Flap from the door
then drill the two screw holes using a 6mm (") drill bit,
remembering to hold the drill horizontally. We recommend
that you choose the correct length of screw to attach the
Cat Flap to your door at this stage. See the next step.
9
15 to 30mm
To choose the correct length of screw, from the sets provided
you need to compare the screw lengths to the thickness
of your door. The screw needs to be between 15 to 30mm
( to 1 ") longer than the thickness of your door.
10
Put the Cat Flap back through the door and slide the external
frame over the tunnel. Holding the product firmly in place,
use a cross head screwdriver and the screws you selected
previously, to attach the external frame. Fasten the first screw
until it is secure, but not too tight, then do the same to the
last one. Once all the screws are secure, tighten them.
11 Now, insert the two screw caps into the external frame.
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for SureFlap Microchip Cat Flap Connect at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of SureFlap Microchip Cat Flap Connect in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 17.89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info