782760
22
Zoom out
Zoom in
Previous page
1/388
Next page
21
accessory
Fitting your Cat Flap in a metal door
Before you begin
It’s important to check whether your door contains a metal plate or thin metal foil before
fitting because the presence of metal can aect the performance of the Cat Flap. This can be
done by holding a magnet to the door, however some metals such as Aluminium cannot
be detected this way so you may need to cut a small hole to check. Metal door handles
or letter boxes should not cause a problem and for most cases any interference from doors
containing metal will be unnoticeable. To reduce the risk of interference we recommend
cutting a slightly bigger hole.
uPVC coated metal doors oen look the same as standard uPVC doors and you
may need to look carefully where the panel has been cut.
Tools and supplies required
Ruler Sharp pencil Cat Flap Mounting Adaptor
Spirit level Electric jigsaw Electric drill with a 6mm (") drill bit
Blu Tack Protective eye-wear Cross head screwdriver
The screws and screw caps provided
Installation video tutorials (English speaking) can be found at
surepetcare.com/support
Step-by-step guide
Before you begin, have you added all of your pets? If not, see page 9.
1x
To ensure your cat has unhindered access through the Cat Flap,
measure the height from their tummy to the floor. Mark this
height on your door, as this will help you to align the hole.
2
Attach a ball of Blu Tack (or similar adhesive putty) to each
rear corner of the external frame so that you can attach it to
the door and use it as a template.
3x
Stick the external frame to the door and use the mark you
made for the height of your cat’s tummy to align the inside
bottom edge of external frame. Use a spirit level to ensure
it is level, then run a sharp pencil around the outside of
the frame.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for SureFlap Microchip Cat Flap Connect at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of SureFlap Microchip Cat Flap Connect in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 17.89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info