Manual SureFlap Microchip Cat Flap Connect (page 23 of 388) (English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish, Finnish)

782760

Zoom out

Zoom in

1/388

45mm

Now mark your cutting line 5mm (") inside the line you

just traced. Once complete, rub out the original traced line

if you can so that you don’t get confused.

When using power tools, please follow all safety instructions provided with the

product.

Now it’s time to prepare for cutting. We strongly advise that

you drill large holes in all the corners of the outline to make

it easier to cut the hole with a jigsaw. Make sure these holes

are touching the line and that they are big enough for the

blade of the jigsaw to fit through.

Using a jigsaw, cut around the inner edge of the line you have

marked. Once the hole is cut, to select the correct length of

screw from the sets provided, you need to compare the screw

lengths to the thickness of your door. The screw length needs

to be between 20 to 35mm ( to 2 ") longer than the

thickness of your door.

Apply a line of clear all-weather sealant to the back of both

mounting adaptors, about 15mm (") from the edge. Make

sure your Cat Flap is nearby and ready to be fitted. Place one

of the mounting adaptors (it doesn’t matter which) over the

tunnel of the Cat Flap so that the patterned side with the ribs

is facing outwards and is not touching any surfaces.

We advise that there are two people present for this step;

one person inside the house and one outside. From inside

the house, put the tunnel through the hole in the door.

Remember the SureFlap logo must be inside the house.

From the outside of the house, check that the tunnel is in

the centre of the hole and not resting on the edge of the

hole, then take the second mounting adaptor and side it over

the tunnel with the sealant facing the door. You may need the

person inside the house to keep pressure on the Cat Flap to

make sure it stays in place.

Next, slide the external frame over the tunnel. The person on

the inside of the house should keep pressure on the Cat Flap

and hold it so that the tunnel is in the centre of the hole.

Using a cross head screwdriver and the length of screw you’d

chosen, secure the external frame in place. Fasten the first

screw until it is secure, but not too tight, then do the same

to the last one. Once all the screws are secure, tighten them.

11 Now, insert the two screw caps into the external frame.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of SureFlap Microchip Cat Flap Connect in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 17.89 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

SureFlap Microchip Cat Flap Connect Manual

Product: