Manual SureFlap Microchip Cat Flap Connect (page 25 of 388) (English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish, Finnish)

782760

Zoom out

Zoom in

1/388

Step-by-step guide

Before you begin, have you added all of your pets? If not, see page 9.

To ensure your cat has unhindered access through the Cat Flap,

measure the height from their tummy to the floor. Mark this

height on your wall, as this is where the bottom of the hole

should be cut through the wall. Note: If there is a large drop

on the outside of the house you will need to place a step

outside for your pet to access the tunnel.

Attach a ball of Blu Tack (or similar adhesive putty) to each

rear corner of the external frame so that you can stick it to

the wall and use it as a template.

Stick the external frame to the wall using the mark you made

for the height of your cat’s tummy to align the bottom edge

of the hole. Use a spirit level to ensure the frame is level,

then run a sharp pencil around the inside edge of the frame.

Now mark the centre of the drawn area, this will be used as

a reference point. Before you start to cut the hole remove

the Cat Flap from the area to minimise the amount of dust

the product is subjected to.

Using the appropriate power tool and drill bit for your wall

(please consult a builder to identify the appropriate tools),

drill a hole all the way through the wall at the centre point

you marked. We advise you have somebody assisting you

with a vacuum cleaner, so as not to fill the room with dust.

Now, from the outside of your house, use the drilled hole as

a reference and stick the external frame to the wall. We advise

that you stick the external frame a few millimetres lower

than the inside to allow for any rain collected in the tunnel

to run back outside.

Back on the inside of the house; whether you are cutting

through brick, wood, tiles or plaster, you should drill some

pilot holes, firstly around the perimeter of the line you have

drawn and then in the middle of the marked area. The holes

around the perimeter should be touching the inside of

the line and the holes in the centre should go all the way

through the wall to help with the cutting process.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of SureFlap Microchip Cat Flap Connect in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 17.89 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

SureFlap Microchip Cat Flap Connect Manual

Product: