782757
6
Zoom out
Zoom in
Previous page
1/146
Next page
10
EN
9
Fitting your cat flap
Where to fit your cat flap
The cat flap can be fitted in any of the following locations. Please see the specified pages for
more information on the tools and supplies you’ll need and step-by-step fitting instructions.
SureFlap accessories are
required for wall, glass and
metal installation. Visit
surepetcare.com/accessories
Make sure that your cat
flap is facing the right way.
The side with the SureFlap
logo should be inside.
We strongly advise contacting
a glazier for glass fitting and
a builder for wall fitting.
Cat behaviour expert's advice
We have provided a few tips on finding the best placement for your cat flap as they can be
a point of vulnerability for your pet. Whilst the back door might be the obvious place to fit a
cat flap, you need to consider how the layout of your garden might aect your cat.
Things to bear in mind
Key fitting features
We recommend
programming your cat(s)
prior to fitting (see page 7).
Make sure you allow
enough time to set up and
fit your cat flap.
Please feel free to watch our
online installation videos at
surepetcare.com/support
Conceal the cat flap with potted plants
as entering onto a large open space can
be stressful for some pets.
Use potted plants or garden furniture to try and reduce the risk of neighbourhood cats
being able to ambush your cat from elevated places.
Make sure your cat flap is fitted at the
right height for your pets so it’s easy for
them to get in and out.
External frame
External
screw holes
Tunnel
External
screw
caps
Do not under any circumstances drill
or cut the tunnel of your cat flap
External
frame
dimensions
210 x 210mm
(8 '' x 8 '')
Flap
opening
dimensions
142 x 120mm
(5 '' x 4 '')
External
tunnel
dimensions
165 x 171mm
(6 '' x 6 '')
Tunnel
depth
75mm
(2 '')
It's important to check if your door has metal within it, as this can interfere with the
cat flap sensors. This can be done by holding a magnet to the door, however some
metals such as Aluminium cannot be detected this way so you may need to cut a
small hole to check. See page 15 for more details.
For glass installation you may need to buy a new pane of glass especially if you
have a double or triple glazed unit. A hole has to be cut through the glass to fit the
cat flap and we strongly advice that you contact a glazier to do this. You may need to
provide the glazier with dimensions for placement of the hole, details for this can be
found on page 13.
Doors containing metal, see page 15
Walls (consult a builder), see page 17
Wooden/plastic doors, see page 11
Glass (glazier required), see page 13
External
screws
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for SureFlap Microchip Cat Flap - serie nr 2000000 plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of SureFlap Microchip Cat Flap - serie nr 2000000 plus in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 13.72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info