501843

Summa SummaSign Pro SL T-series Manual

58
Zoom out
Zoom in
Previous page
1/81
Next page
SummaSign Pro SL D-series Cutters User’s Manual
Operation 2-16
2.4.13 MEDIA SENSOR
The MEDIA SENSOR submenu is used to activate or deactivate the media
sensors. The sensors detect the presence and absence of media to prevent
damage to the cutting strip and knife tip.
The active setting is marked with an asterisk (¾) on the LCD.
2.4.14 AUTOLOAD
The AUTOLOAD option allows the user to control how vinyl is pulled from the roll.
When AUTOLOAD is ON, the cutter will automatically unroll the vinyl as needed.
When AUTOLOAD is OFF, the user should manually unroll sufficient vinyl before
beginning to cut.
The default AUTOLOAD setting is ON. The best results and performance are
guaranteed when using this setting.
The active setting is marked with an asterisk (¾) on the LCD.
2.4.15 TOOL COMMAND
TOOL COMMAND is used to determine whether the DM/PL and HP-GL
pen/knife-select commands (the P and SP commands, respectively) are
ignored or accepted.
When the TOOL COMMAND option is set to “ACCEPT”, the P or SP commands
will change the selected tool in the cutter according to the suffix that follows
the pen/knife command. When a P2 command is sent, the cutter’s LCD will
prompt the user with the following message: “INSERT PEN”. When the TOOL
COMMAND option is set to “IGNORE”, the pen/knife commands are ignored.
The default setting is “ACCEPT”.
The active setting is marked with an asterisk (¾) on the LCD.
2.4.16 LOAD ON W CMD
The LOAD ON W CMD submenu will only be displayed if the PLOT LANGUAGE is
set to DM/PL (See Paragraph 2.4.4). When receiving the DM/PL Window-
command (W-command), LOAD ON W CMD determines whether media is
loaded apart from the scaling function. In addition to scaling, the W-command
is very useful when cutting long signs. Media loading will go more smoothly with
the W-command because sufficient media will be pulled from the roll at once.
Then, even when AUTOLOAD is off, there is no need to unroll the media
manually.
… 58 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Summa SummaSign Pro SL T-series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Summa SummaSign Pro SL T-series in the language / languages: English as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info