501843

Summa SummaSign Pro SL T-series Manual

59
Zoom out
Zoom in
Previous page
1/81
Next page
SummaSign Pro SL D-series Cutters User’s Manual
Operation 2-17
2.4.17 FLEX-CUT
FLEX-CUT can be set to OFF, Mode 1 or Mode 2. When set to Modes 1 or 2, the
cutter will alternately cut one length with full pressure and one length with
reduced pressure. FLEX-CUT offers the advantage of cutting completely
through the material while, at the same time, allowing the material to stay
together by means of small media bridges.
MODE 1 is the quickest mode, but is less precise because the pressure changes
during the cutting. MODE 2 is considerably slower than Mode 1, but at the same
time it offers greater precision because the cutter stops at every change of
pressure. Pressing the
1 key will activate the configuration menu, which allows
you to set the cutting pressure and cut length.
1. CUT LENGTH
This parameter determines the length that will be cut with full pressure. By
pressing the
1 key, the FLEX-CUT test pattern will be cut.
2. FLEX-CUT LENGTH
This parameter determines the length that will be cut with reduced or no
pressure. By pressing the
1 key, the FLEX-CUT pattern will be cut.
3. FLEX PRESSURE
This parameter determines the pressure of the FLEX-CUT LENGTH. By pressing the
1 key, the FLEX-CUT test pattern is cut.
2.4.18 RECUT OFFSET
The RECUT OFFSET submenu is used to set or modify the distance between
graphics when making multiple recuts.
The distance can be set between 0 and 255 mm.
The default recut offset value is 0 mm.
The active recut offset value is marked with an asterisk (¾) on the LCD.
… 59 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Summa SummaSign Pro SL T-series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Summa SummaSign Pro SL T-series in the language / languages: English as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info