501843
57
Zoom out
Zoom in
Previous page
1/81
Next page
SummaSign Pro SL D-series Cutters User’s Manual
Operation 2-15
2.4.10 DM/PL ERRORS
The DM/PL ERRORS submenu is used to determine whether or not different
DM/PL errors, such as illegal plot commands, invalid parameter ranges or
communication errors will be displayed on the LCD. This menu will only be
displayed if PLOT LANGUAGE is set to DM/PL.
The DM/PL ERRORS submenu can be set to REPORTED or IGNORED.
This feature is activated by selecting REPORTED, and is normally used only when
attempting to debug a communication link between the cutter and the host
computer.
After the communication link has been debugged, select IGNORED to disable
the feature.
The active setting is marked with an asterisk (¾) on the LCD.
2.4.11 HP-GL ERRORS
The HP-GL ERRORS submenu is used to determine whether or not different HP-GL
errors, such as illegal plot commands, invalid parameter ranges or
communication errors will be displayed on the LCD. This menu will only be
displayed if PLOT LANGUAGE is set to HP-GL (See Paragraph 2.4.3).
The HP-GL ERRORS submenu can be set to REPORTED or IGNORED.
The feature is activated by selecting REPORTED, and is normally used only when
attempting to debug a communication link between the cutter and the host
computer.
After the communication link has been debugged, select IGNORED to disable
the feature.
The active setting is marked with an asterisk (¾) on the LCD.
2.4.12 HP-GL ORIGIN
The HP-GL ORIGIN submenu will only be displayed if the PLOT LANGUAGE is set
to HP-GL. (See Paragraph 2.4.4). The HP-GL ORIGIN submenu is used to set the
origin in the center (see HP-GL 758x) or the bottom-right corner (see HP-GL
7475) of the loaded media.
The HP-GL ORIGIN option can be set to RIGHT_FRONT or CENTER.
If the cut is found to be incomplete, and is wholly located in the upper left
corner of the media, then change the HP-GL ORIGIN setting to RIGHT FRONT.
If the cut is found to be incomplete, and is wholly located in the lower right
corner of the media, then change the HP-GL ORIGIN setting to CENTER.
The active setting is marked with an asterisk (¾) on the LCD.
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Summa SummaSign Pro SL T-series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Summa SummaSign Pro SL T-series in the language / languages: English as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info