Manual Strong SRT 82 (page 12 of 24) (English)

751656

Zoom out

Zoom in

1/24

indications for a low device speed. STRONG cannot guarantee proper functioning of recording and or

Timeshift functions with all USB devices.

4.0 STARTING UP FOR THE FIRST TIME

If you use your receiver for the rst time, the Installation Guide menu appears. Use pq to move the

highlight to the setting you wish to change and use tu to change values. Start by selecting your

On-Screen Language (OSD) using tu. Once you have selected your language, press q to move the

highlight to Country. Select your country using tu.

Other options are:

Antenna Power: Set to On if you use an active antenna. When set to On, a 5 Volt power will

be present on the RF IN connector of the receiver. Select O for passive

antennas.

Scan mode: Select All to store scrambled and free to air channels or select FTA to store

only Free-To-Air channels. Note: Scrambled channels you cannot watch with

this receiver.

Once all settings are made, move the highlight to Channel Search and press OK to start scanning.

The receiver will now search for all available channels. Once scanning is nished, the receiver switches

to viewing mode.

NOTE: Selecting the wrong country may result in a disorderly channel list, and

missing of channels.

TIP: In case the Installation Guide menu does not appear after switching on the

receiver the rst time, reset the receiver to factory settings by pressing the

MENU button and selecting Restore Factory Default in submenu System.

(Default PIN 1234)

5.0 QUICK GUIDE TO USING YOUR RECEIVER

We at STRONG understand that you can't wait to enjoy your new high denition digital terrestrial

receiver. The following quick guide will make you familiar with the basic operation of this device. We

do, however, advice you to read the full manual to get the best performance from your receiver.

To turn your receiver ON or to Standby, use the q button on the remote control.

Choose the desired channel with the pq buttons. Alternatively, you can digit the channel number

with the 0~9 buttons on the remote control. Or press OK in viewing mode to display the channel list.

The volume can be adjusted with the tu buttons.

Default Password is 1234.

6.0 OPERATION

Your new receiver is equipped with several features to make watching TV a true pleasure. This

paragraph describes these features. Please also read chapter 7.0 to get familiar with the menu of your

receiver.

Salve ho aggiornato il decoder tramite chiavetta usb dopodichè ha smesso di funzionare e non si riaccende più. Se qualcuno mi può aiutare grazie Submitted on 24-4-2022 at 14:40
Reply Report abuse
Ho aggiornato il decoder tramite usb dopodichè ha smesso di funzionare. Submitted on 24-4-2022 at 14:36
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 82 in the language / languages: English as an attachment in your email.

The manual is 0,89 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong SRT 82

Strong SRT 82 User Manual - French - 26 pages

Strong SRT 82 User Manual - Italian - 27 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Strong SRT 82 Manual

Product: