751656
23
Zoom out
Zoom in
Previous page
1/24
Next page
Problem Possible cause What to do
After moving the
DVB-T2 receiver to
another room/area you
are no longer able to
receive digital reception.
The antenna signals are too weak. Press INFO on the remote
control to keep the signal bars
on screen and adjust the Indoor
antenna for maximum reception.
Alternatively, do a rescan of the
channels.
The signal strength/quality might
be less than before, if using an
indoor antenna.
When using an active antenna,
check if the antenna power
setting is On.
Try using an outdoor antenna.
The receiver switches
o or to standby
automatically.
The Auto Standby function is
enabled and has reached the
set time.
Disable Auto Standby. Refer to
the user manual of your receiver
for details.
Forgotten PIN code/
password.
The default PIN is 0000 or 1234
(refer to the user manual of your
Device).
Contact your local Service Hotline
or send an email to our Support
via www.strong.tv
Forgotten channel lock
code.
Contact your local Service Hotline
or send an email to our Support
via www.strong.tv
Playback of video (or
Timeshift) is causing
picture freeze/macro
blocks or similar
distortion, especially on
HD content.
The read/write speed of your USB
device could be too low.
Make sure to use a USB storage
device with sucient speed and
space. Pen drives (‘USB receivers')
may not support sucient speed.
The USB storage device
is not working properly.
The power consumption is too
high.
Connect an extra power supply
adapter to your USB HDD device.
The USB device is formatted
incorrectly.
Format the USB device on a PC
to FAT 32.
Recording is no longer
possible.
The selected storage medium
is full.
Delete existing recording(s).
Attach and use another storage
medium.
The receiver
automatically switches
o after a certain time.
The Auto Standby function is
enabled.
Check the Auto Standby setting
and disable if necessary.
19
23


Need help? Post your question in this forum.

Forumrules
1

Forum

strong-srt-82

Reset search

  • Salve ho aggiornato il decoder tramite chiavetta usb dopodichè ha smesso di funzionare e non si riaccende più. Se qualcuno mi può aiutare grazie Submitted on 24-4-2022 at 14:40

    Reply Report abuse
  • Ho aggiornato il decoder tramite usb dopodichè ha smesso di funzionare. Submitted on 24-4-2022 at 14:36

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 82 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 82 in the language / languages: English as an attachment in your email.

The manual is 0,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong SRT 82

Strong SRT 82 User Manual - French - 26 pages

Strong SRT 82 User Manual - Italian - 27 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info