751656

Strong SRT 82 Manual

22
Zoom out
Zoom in
Previous page
1/24
Next page
Problem Possible cause What to do
No sound on TV or
amplier.
The volume of the TV is set too
low.
The volume of the receiver is set
too low.
Increase the volume of the TV
with its remote control.
Increase the volume of the
receiver with its remote control.
The correct input is not selected
on your TV or amplier, or the unit
is set to a higher resolution than
supported by the TV.
Switch to the correct TV/amplier
input.
Select lower resolution on the
receiver.
The TV, digital receiver or amplier
is not switched on.
Switch the TV/digital receiver/
amplier on.
The TV or digital receiver is not
connected to the mains.
Check the mains lead.
Bad cable connection. Make sure that any existing
digital or analogue A/V cable
connections between the used
equipment (TV, digital receiver
or A/V amplier) are properly
connected.
Audio is muted. Press the ! button on your
remote control.
The TV power is o. Turn the TV on.
No access to scrambled
services.
The channel is scrambled.
Your receiver doesn't support
scrambled channels.
Select an alternative channel.
No response to the
remote control.
The receiver is o. Plug in and turn on the receiver.
The remote control is not aimed
correctly.
Aim the remote control at the IR
sensor on the front panel of the
receiver.
The IR sensor on the front panel of
the receiver is obstructed.
Avoid or remove obstructions.
The batteries of the remote
control are not inserted, wrongly
inserted or exhausted.
Check whether the batteries are
inserted correctly or exhausted. If
exhausted, replace the batteries in
the remote control.
18
… 22


Need help? Post your question in this forum.

Forumrules
1

Forum

strong-srt-82

Reset search

  • Salve ho aggiornato il decoder tramite chiavetta usb dopodichè ha smesso di funzionare e non si riaccende più. Se qualcuno mi può aiutare grazie Submitted on 24-4-2022 at 14:40

    Reply Report abuse

  • Ho aggiornato il decoder tramite usb dopodichè ha smesso di funzionare. Submitted on 24-4-2022 at 14:36

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 82 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 82 in the language / languages: English as an attachment in your email.

The manual is 0,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong SRT 82

Strong SRT 82 User Manual - French - 26 pages

Strong SRT 82 User Manual - Italian - 27 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info