Manual Strong SRT 82 (page 11 of 24) (English)

751656

Zoom out

Zoom in

1/24

2.5 Using the remote control and the IR extender.

Connect the external IR extender to the unit at the IR connector and place the sensor end somewhere

convenient, where it can be “seen” by the Remote Control, for example on the TV front panels bezel.

Use the provided double sided sticker.

Fig.4

To use the remote control, point it towards the external IR extender. The remote control supports a

range of up to 5 meters distance to the receiver at an angle of up to approx. 30 degrees.

NOTE: Managing the receiver will be limited or not possible if there are obstacles

between the remote control sensor and the remote control. Direct sunlight

or very bright light can reduce or disturb the reception of the remote

control signals.

3.0 CONNECTION

3.1 Connecting to a terrestrial antenna

Fig.5

To receive broadcast signal, your terrestrial indoor or outdoor antenna must be connected to the RF

IN connector of the receiver. Use a properly shielded antenna cable and suitable connectors.

Use the provided SMA to IEC adapter to connect your antenna.

3.2 Connecting to TV with HDMI extender cable or directly

to HDMI port.

Fig.5

The TV set can be connected with the receiver using the provided HDMI extender cable.

If enough spacing left between HDMI inputs and sucient space is available to accommodate the

various cables, then the receiver can also be inserted directly in to an HDMI port of the TV. Proceed

with care, no physical tension should occur to the TV or receiver once inserted.

3.3 Connecting a USB storage device

Fig.6

NOTE: We recommend the use of a hard disk drive USB 2.0 or higher for recording

and play back of TV events.

Use the provided Y-cable (USB-A female at one end, USB-A male and USB-micro to each of the legs).

Connect the USB A plug to the USB port on your TV that is suitable for supplying power to external

devices (5V and 0.9A) and connect the USB micro plug to the receiver.

The USB-S female can be used to connect an optional external HDD. The HDD will thus be powered

by the TV, not by the receiver.

For proper functioning of Timeshift and recording functions, a fast USB device (such as a hard

disk drive) is needed. Interrupted playback or a distorted picture during playback or Timeshift are

Salve ho aggiornato il decoder tramite chiavetta usb dopodichè ha smesso di funzionare e non si riaccende più. Se qualcuno mi può aiutare grazie Submitted on 24-4-2022 at 14:40
Reply Report abuse
Ho aggiornato il decoder tramite usb dopodichè ha smesso di funzionare. Submitted on 24-4-2022 at 14:36
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 82 in the language / languages: English as an attachment in your email.

The manual is 0,89 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong SRT 82

Strong SRT 82 User Manual - French - 26 pages

Strong SRT 82 User Manual - Italian - 27 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Strong SRT 82 Manual

Product: