480581

Strong SRT 6505 Manual

14
Zoom out
Zoom in
Previous page
1/23
Next page
PART 1 • English
12
8.2.4 Setup Lock/PIN
Press OK on ‘Setup Lock/PIN’ in the Setup Menu. Set the Menu Lock, Change the PIN, enter the New PIN and confirm the Confirm PIN.
n Use CH p/q to move up and down the list.
n Use VOL t/u to change the setting.
Menu Lock: On/Off
Change PIN: Press OK if you want to change.
New PIN: Enter your new 4-digit code
Confirm PIN: Confirm your new 4-digit code
Note: The default PIN is ‘1234’
Press EXIT to go back to the previous mode.
8.2.5 Time Setting
Press OK on ‘Time Setting’ in the Setup Menu. Set the Local Time, Sleep Time, Timer Status and Program the Timer.
n Use CH p/q to move up and down the list.
n Use VOL t/u to change the setting.
Local Time: if you want to correct time and date then enter in format dd/mm/yyyy - day – hh:mm
Sleep Time: 0 ~ 180 min. Receiver will be turned off after selected time interval.
Timer: select timer number
Status: Disabled/Enabled. If Enabled – receiver will be turned on within selected channels at defined “start time” and
turned off after “duration” interval
Channel type: TV/Radio.
Channel number: enter channel number. If you use multi satellite installation – make sure to enter channel number in “All satellites” mode.
Channel name: displayed automatically and depends from channel number.
Start time: enter start time in format dd/mm/yyyy - day – hh:mm
Duration: enter duration in hh:mm format.
Note: Timer also can be programmed from EPG. See “Program Guide” chapter of this manual.
n Press OK to store settings and go back to the previous mode.
8.2.6 Factory Default
Press OK on ‘Factory Set’ in the Setup Menu. Confirm whether you wish to go back to the factory default settings.
This function wi�
the memory.
8.3 Main Menu Settings
From the Main Menu you can access to the Program Guide, Channel Sorting,, Language Preference Settings, Favorites Editing, Channel
Editing, Smart card information and Software Version information.
n Press MENU
n Use CH p/q to move up and down the list
n Use VOL t/u to change the setting
n Upon reaching the required menu line, press OK to enter the setting
n Press EXIT to go back to the previous mode
8.3.1 Program Guide
This menu displays same information as described in chapter 8.4.4. Press OK on ‘Program Guide’ in the Main Menu.
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 6505 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 6505 in the language / languages: English as an attachment in your email.

The manual is 1,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info