537132
73
Zoom out
Zoom in
Previous page
1/122
Next page
72 MS 240, MS 260, MS 260 C
Position the tank housing on the
annular buffer – the holes must
line up.
Fit the washer (1).
: Insert screw (arrow) and tighten it
down firmly.
Reassemble all other parts in the
reverse sequence.
Tightening torques, b 3.5
11.4 Stop Buffer
Remove the carburetor, b 14.2
Take out the annular buffer/tank
housing mounting screws.
Annular buffer at ignition side,
b 11.3.
Annular buffer at clutch side,
b 11.2
Push the manifold out of the tank
housing, b 14.6.1
Pull off the impulse hose,
b 14.6.2
165RA259 TG
1
Lower the tank housing a little –
check that the impulse is pushed
fully onto the connector on the
crankcase.
: Ease the stop buffer (1) out of the
bore.
Check the stop buffer (1) and
replace if necessary
Position the stop buffer (1) so that
its tapered side (arrow) faces
away from the tank housing.
: Push the stop buffer (1) into the
bore and make sure it is properly
seated.
Reassemble all other parts in the
reverse sequence.
Tightening torques, b 3.5
165RA498 TG
1
165RA261 TG
1
11.5 Handlebar
Remove the sprocket cover and
cutting attachment, b 5
Remove the shroud, b 8.4
: Remove the screws (arrows)
from the underside of the
machine.
: Take out the screws (arrows).
165RA262 TG
165RA263 TG
73


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl MS 240 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl MS 240 in the language / languages: English as an attachment in your email.

The manual is 4,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stihl MS 240

Stihl MS 240 User Manual - German, Dutch, French, Italian - 196 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info