537132
72
Zoom out
Zoom in
Previous page
1/122
Next page
71MS 240, MS 260, MS 260 C
: Pry out the annular buffer (1).
Check the annular buffer (1) and
replace if necessary
Hold the annular buffer (1)
with its small diameter facing the
crankcase.
Use STIHL press fluid to simplify
assembly,
b 17
: Push the annular buffer (1) into
the bore until its groove (arrow)
engages the housing rib (2).
165RA486 TG
1
165RA256 TG
1 2
Position the tank housing on the
annular buffer – the holes must
line up.
: Insert screw (arrow) and tighten it
down firmly.
Push the plug into the annular
buffer as far as stop.
Reassemble all other parts in the
reverse sequence.
Tightening torques, b 3.5
11.3 Annular Buffer at Ignition
Side
Remove the shroud, b 8.4
Push the wiring harness (1) to
one side.
: Take out the screw (arrow) and
remove the washer (2).
165RA254 TG165RA257 TG
1
2
: Take out the screws (arrows) and
remove the retaining plate (2).
Remove the annular buffer (1).
Check the annular buffer (1) and
replace if necessary
Hold the annular buffer (1)
with its tapered side facing the
crankcase.
Fit the annular buffer (1) in
position.
Fit the retaining plate (2) in
position.
Check that the ignition lead is in
its guide and not pinched.
: Insert screws (arrows) and
tighten them down firmly.
165RA258 TG
1
2
165RA242 TG
1
2
72


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl MS 240 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl MS 240 in the language / languages: English as an attachment in your email.

The manual is 4,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stihl MS 240

Stihl MS 240 User Manual - German, Dutch, French, Italian - 196 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info