537132
71
Zoom out
Zoom in
Previous page
1/122
Next page
70 MS 240, MS 260, MS 260 C
11. Servicing the AV System
Vibration-damping rubber buffers
are used for the connection
between the handlebar, tank
housing and engine housing.
Damaged rubber buffers (annular
buffers) must always be replaced.
11.1 Annular Buffer on Chain
Catcher
Always replace a damaged annular
buffer.
Remove the sprocket cover and
cutting attachment, b 5
Remove the side plate, b 7.6
: Insert screw (arrow) part way and
pull out the plug (1).
: Take out the screw (arrow).
Pry out the annular buffer (1).
165RA248 TG
1
165RA249 TG
1
Use STIHL press fluid to simplify
assembly, b 17
Hold annular buffer with its small
diameter (1) facing the housing.
: Push the annular buffer (1) into
the bore until its groove (arrow)
engages the housing rib (2).
Insert screw and tighten it down
firmly.
: Position the plug (1) so that its
recesses match those on the
housing (see arrows).
Push the plug into the annular
buffer as far as stop.
Use STIHL press fluid to simplify
assembly,
b 17
165RA250 TG
1
2
165RA251 TG
1
Reassemble all other parts in the
reverse sequence.
Tightening torques, b 3.5
11.2 Annular Buffer at Clutch
Side
Remove the sprocket cover and
cutting attachment, b 5
: Pry out the plug(1).
: Take out the screw (arrow).
165RA253 TG
1
165RA254 TG
71


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl MS 240 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl MS 240 in the language / languages: English as an attachment in your email.

The manual is 4,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stihl MS 240

Stihl MS 240 User Manual - German, Dutch, French, Italian - 196 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info