608752

Stiga SHT 5224 A Manual

22
Zoom out
Zoom in
Previous page
1/138
Next page
1. CHECKING THE MACHINE
Ensure that the accumu-
lator is not inserted in its compartment.
Before starting work please:
– check that the switch lever and the safety switch
handle move freely without forcing and return au-
tomatically and rapidly back to their neutral po-
sition;
– check that the cooling air vents are not ob-
structed;
– check that the power cable and extension lead
are not damaged;
– check that handgrips and protection devices are
clean and dry, correctly mounted and well fas-
tened to the machine;
– check that the machine is not showing signs of
wear or damage due to knocks or other causes,
and carry out the necessary repairs.
– check that the accumulator is in good working con-
dition and there are no signs of damage. Never
use the machine with a damaged or worn accu-
mulator;
– charge the accumulator according to the in-
structions in the “Charging the accumulator”
chapter.
2. CHARGING THE ACCUMULATOR (Fig. 1)
If the accumulator (1) is already in its seat on the tool
(2), press both side buttons on the accumulator (1)
and pull it outwards to extract it.
Check that the socket mains
voltage is the same as that indicated on the battery
charger plate.
IMPORTANT
WARNING!
To recharge the accumulator, proceed as follows:
– connect the battery charger (4) to a mains pow-
er socket;
– connect the battery charger (4) plug (3) to the ac-
cumulator socket (1).
The red indicator light (5) will come on indicating that
accumulator charging has begun.
If the indicator light does not
come on, check that power is supplied to the
mains socket.
When the accumulator is completely charged, the
green indicator light (5a) flashes and recharging will
stop automatically.
When the accumulator is completely charged, the
green indicator light (5a) flashes and recharging will
stop automatically.
It takes about 3-5 hours to complete the recharge
process, according to the starting status of the ac-
cumulator.
It is not necessary to check
the recharge time. The accumulator will heat up dur-
ing the recharge process. This is normal and is not
due to defects or faults.
When recharging has been completed,
– position the charged accumulator (1) in its seat
on the tool, pushing inwards until both side but-
tons click into place; the accumulator will only fit
inside the tool when inserted correctly
– disconnect the battery charger (4) from the
mains socket when not in use.
NOTE
NOTE
Charge the accumulator before using the tool fol-
lowing the instructions in the “Charging the accu-
mulator” chapter.
Unpacking and complet-
ing the assembly should be done on a flat and
stable surface, with enough space for moving
the machine and its packaging, always making
use of suitable equipment.
Disposal of the packaging should be done in ac-
cordance with the local regulations in force.
WARNING!
Mount the components
very carefully so as not to impair the safety
and efficiency of the machine. If in doubt, con-
tact your dealer.
Remove the machine from its packaging, taking
care to gather all the machine contents and docu-
ments.
For safety reasons during transportation, the lithium
ion accumulator is completely flat when delivered
and packed separately.
Ensure that the accumulator is not inserted in its
compartment.
WARNING!
6
MACHINE ASSEMBLY / PREPARING TO WORK
EN
4. MACHINE ASSEMBLY
5. PREPARING TO WORK
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stiga SHT 5224 A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stiga SHT 5224 A in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 1,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stiga SHT 5224 A

Stiga SHT 5224 A User Manual - Danish, Swedish, Norwegian, Finnish - 128 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info