Manual Stiga SHT 5224 A (page 24 of 138) (English, German, Dutch, French, Italian, Polish, Portuguese, Turkish, Spanish)

608752

Zoom out

Zoom in

1/138

This machine’s engine

generates an average sized electromagnetic

field, but it is not possible to exclude the pos-

sibility of interference with any active or pas-

sive medical devices that operators may be

using, with possible ensuing serious risks for

health. All those using medical devices should

always consult their GP, or the device manu-

facturer, before using this machine.

1. USING THE MACHINE

When cutting, always hold

the machine firmly with both hands.

The accumulator is fitted with a protection system

which prevents it from running completely flat.

The power tool will automatically switch off when

the accumulator is flat. If this happens, it must

promptly be recharged.

Immediately stop the mo-

tor if the blades block while running or if they

get caught up in the hedge branches.

2. REGULATING THE FRONT HANDGRIP

(Fig. 3)

The front handgrip (1) can be adjusted to 3 differ-

ent positions in relation to the cutting device to

make trimming your hedges easier.

The handgrip must only

be adjusted when the motor is switched off.

– Press one of the two release buttons (2).

– Rotate the front handgrip (1) to the desired po-

sition.

– Before using the machine, make sure that the re-

lease buttons (2) have returned to the original

position and that the front handgrip is firmly at-

tached.

When working, the front

handgrip must always be in the horizontal po-

sition, whatever the position of the cutting de-

vice (3).

WARNING!

DANGER!

WARNING!

7) Thoroughly inspect the whole work area

and remove anything that could be thrown

up by the machine or damage the cutting

device (branches, iron wire, hidden

wiring, etc.).

8) Be careful of flying debris coming from

the cutting device.

9) Stop the motor and remove the accumula-

tor from its compartment.

– whenever you leave the machine unat-

tended;

– before cleaning, checking or working

on the machine;

– after striking a foreign object. Inspect

the machine for any damage and make

repairs before restarting it again;

– if the machine starts to vibrate abnor-

mally: find the cause of the vibration im-

mediately and have it inspected at a Spe-

cialised Centre;

– when the machine is not in use.

10) Always keep hands and feet away from

the cutting device, especially when start-

ing the motor.

Remember that an electric

hedge trimmer used incorrectly can be a distur-

bance to others. To respect people and the envi-

ronment:

– Avoid using the machine in environments or at

times of the day when it may disturb others.

– Scrupulously comply with local regulations and

provisions for the disposal of waste materials

after cutting.

– To avoid the risk of fire, do not leave the machine

with the motor hot on leaves or dry grass.

– Scrupulously comply with local regulations and

provisions for the disposal of damaged parts or

any elements which have a strong impact on

the environment.

Prolonged exposure to vi-

brations can cause injuries and neurovascular

disorders (also called “Renaud’s syndrome”

or “white hand”), especially to people suffer-

ing from circulation disorders. The symptoms

can regard the hands, wrists and fingers and

are shown through loss of sensitivity, torpor,

itching, pain and discolouring of or structural

changes to the skin. These effects can be

worsened by low ambient temperatures and/or

by gripping the handgrips excessively tightly.

If the symptoms occur, the length of time the

machine is used must be reduced and a doc-

tor consulted.

WARNING!

IMPORTANT

8 USING THE MACHINE

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Stiga SHT 5224 A in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 1,81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stiga SHT 5224 A

Stiga SHT 5224 A User Manual - Danish, Swedish, Norwegian, Finnish - 128 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Stiga SHT 5224 A Manual

Product: