608752

Stiga SHT 5224 A Manual

23
Zoom out
Zoom in
Previous page
1/138
Next page
ual risk, which cannot be excluded. From
the kind and construction of the tool the
foreseeable potential endangerments can
be:
– Contact with the unprotected cutting
teeth.
– Involve fingers or hands into the moving
cutting blade.
– Unexpected, sudden movement of the
cutting blade.
– Thrown away of chips, it may damage
your eyes.
– Damage of the hearing, if no protection
of the ears is carried.
4) Keep in mind that the operator or user is
responsible for accidents or hazards oc-
curring to other people or their property.
5) Always wear suitable clothing when using
the machine. Your dealer can provide you
with all the information on the most suit-
able accident-prevention devices to guar-
antee your safety.
6) Mow only in daylight or good artificial
light.
For your safety and that
of others:
1) Do not use the machine without having
read the instructions carefully. Become
acquainted with the controls and the pro-
per use of the machine. Learn how to stop
the motor quickly.
2) Only use the machine for its intended use,
that is “the cutting and trimming of hedges,
consisting in plants with small sized
branches”. Any other use may be danger-
ous and severly damage the machine. Ex-
amples of improper use may include, but
are not limited to:
– general grass cutting and in particular,
near kerbs;
– chopping material for composts;
– pruning;
– using the machine for cutting non-plant
material;
– use of the machine by more than one
person.
3) Residual risks: even all the safety rule are
obeyed, there still can be a certain resid-
WARNING!
HIGH = Greater performance and an increase in
energy consumption, reducing the ac-
cumulator’s power reserve;
LOW = Lower performance and a reduction in en-
ergy consumption, increasing the accu-
mulator’s power reserve approximately
twice as much.
To go from one level to another, press the switch (4)
located on the back of the rear handgrip.
STOPPING THE MOTOR (Fig. 2)
To stop the motor:
– Release the handle of the safety switch (2) and
the switch (3).
– Remove the accumulator (1) from its compart-
ment.
When the motor is switched
off, a few sparks may be seen near the ventilation
slots; this is perfectly normal and does not damage
the tool in any manner.
NOTE
STARTING THE MOTOR (Fig. 2)
Before starting the motor:
– Remove the blade protection devices.
– Make sure the blade is not touching the ground
or any other object.
– Make sure that the front handgrip is locked in
the centre position.
– Insert the accumulator (1) inside its compart-
ment.
To start the motor:
1. Hold the machine firmly with both hands.
2. Rotate the handle of the safety switch (2 – located
in the front handgrip) and press the switch (3).
Both switches must be en-
abled in order to switch the motor on and keep it run-
ning. The motor will stop if either switch is released.
USING THE ECONOMISER (Fig. 2)
This machine is equipped with an economiser
system that regulates output power on 2 levels:
NOTE
HOW TO START - STOP THE MOTOR /USING THE MACHINE
7
EN
6. HOW TO START - STOP THE MOTOR
7. USING THE MACHINE
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stiga SHT 5224 A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stiga SHT 5224 A in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 1,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stiga SHT 5224 A

Stiga SHT 5224 A User Manual - Danish, Swedish, Norwegian, Finnish - 128 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info