Manual Stiga SHT 5224 A (page 20 of 138) (English, German, Dutch, French, Italian, Polish, Portuguese, Turkish, Spanish)

608752

Zoom out

Zoom in

1/138

d) Remove any adjusting key or wrench before turning

the power tool on. A wrench or a key left attached to a

rotating part of the power tool may result in personal injury.

e) Do not overreach. Keep proper footing and balance

at all times. This enables better control of the power tool

in unexpected situations.

f) Dress properly. Do not wear loose clothing or jew-

ellery. Keep your hair, clothing and gloves away

from moving parts. Loose clothes, jewellery or long hair

can be caught in moving parts.

g) If devices are provided for the connection of dust ex-

traction and collection facilities, ensure these are

connected and properly used. Use of dust collection

can reduce dust-related hazards.

4) Power tool use and care

a) Do not force the power tool. Use the correct power

tool for your application. The correct power tool will do

the job better and safer at the rate for which it was de-

signed.

b) Do not use the power tool if the switch does not turn

it on and off. Any power tool that cannot be controlled

with the switch is dangerous and must be repaired.

c) Remove the accumulator from its compartment be-

fore making any adjustments, changing accessories,

or storing the power tool. Such preventive safety meas-

ures reduce the risk of starting the power tool accidentally.

d) Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the power

tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained

users.

e) Maintain power tools. Check for misalignment or ob-

struction of moving parts, breakage of parts and any

other condition that may affect the power tool’s op-

eration. If damaged, have the power tool repaired be-

fore use. Many accidents are caused by poorly main-

tained power tools.

f) Keep cutting tools sharp and clean. Properly main-

tained cutting tools with sharp cutting edges are less likely

to become jammed and are easier to control.

g) Use the power tool, accessories and tool bits etc. in

accordance with these instructions, taking into ac-

count the working conditions and the work to be

performed. Using the power tool for operations other

than those intended could result in a hazardous situation.

5) Service

a) Have your power tool serviced by a qualified repair

person using only identical replacement parts. This

will ensure that the safety of the power tool is maintained.

ELECTRIC HEDGE TRIMMER (battery-operated)

SAFETY WARNINGS

The safety rules must be ob-

served during machine use. Before starting the ma-

chine, read the instructions regarding personal safety

and the safety of unauthorized persons. Keep the in-

structions in a good state for future use.

– Keep all parts of the body away from the cutter blade.

Do not remove cut material or hold material to be cut

WARNING!

HOW TO READ THE MANUAL

Certain paragraphs in the manual contain particularly signif-

icant information and are marked with various levels of high-

lighting with the following meaning:

These give details or further infor-

mation on what has already been said, with the aim of pre-

venting damage to the machine.

Non-observance will result in

the risk of injury to oneself or others.

Non-observance will result in

the risk of serious injury or death to oneself or others.

GENERAL POWER TOOL SAFETY WARNINGS

Read all safety warnings and all

instructions. Failure to follow the warnings and in-

structions may result in electric shock, fire and/or seri-

ous injury.

Save all warnings and instructions for future reference.

The term “power tool” in the warnings refers to your battery-

operated (cordless) power tool.

1) Work area safety

a) Keep work area clean and well lit. Cluttered or dark ar-

eas invite accidents.

b) Do not operate power tools in explosive at-

mospheres, such as in the presence of flammable liq-

uids, gases or dust. Power tools create sparks which

may ignite the dust or fumes.

c) Keep children and bystanders away while operating

a power tool. Distractions can cause you to lose control.

2) Electrical safety

a) Avoid body contact with earthed or grounded sur-

faces, such as pipes, radiators, ranges and refriger-

ators. There is an increased risk of electric shock if your

body is earthed or grounded.

b) Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of elec-

tric shock.

3) Personal safety

a) Stay alert, watch what you are doing and use com-

mon sense when operating a power tool. Do not use

a power tool while you are tired or under the influ-

ence of drugs, alcohol or medication. A moment of

inattention while operating power tools may result in seri-

ous personal injury.

b) Use personal protective equipment. Always wear

eye protection. Protective equipment such as dust mask,

non-skid safety shoes, hard hat, or hearing protection

used for appropriate conditions will reduce personal in-

juries.

c) Prevent unintentional starting. Ensure that the battery

is not in its compartment before picking up or carrying the

power tool. Carrying a power tool with the battery can

cause accidents.

DANGER!

WARNING!

IMPORTANT

NOTE

4 SAFETY WARNINGS

3. SAFETY WARNINGS

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Stiga SHT 5224 A in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 1,81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stiga SHT 5224 A

Stiga SHT 5224 A User Manual - Danish, Swedish, Norwegian, Finnish - 128 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Stiga SHT 5224 A Manual

Product: