608664

Stiga 740 WX - P 901 CH Manual

161
Zoom out
Zoom in
Previous page
1/588
Next page
6.16 QUICK-RELEASE SUPPORTS
These support allows the user to swap
from one attachment to another quickly
and easily.
The quick-release supports allow the user to move
the cutting means assembly quickly and easily
between two positions, i.e.:
• Normal position with the belt fully tensioned.
• Positioned 4 cm behind the normal position,
with the belt slackened, so that the cutting
means assembly moves closer to the base of
the machine.
Being as the belt tensioner is released from the
belt, the quick-release supports simplify belt and
cutting means assembly replacement, and also
make shifting to the washing position and service
positions easier.
Belt tension releasing (17; 18)
See also the instructions provided with
the attachment and with the quick-rele-
ase support.
1. Remove the cotter pins or lock pins (17:C)
from both sides.
2. Open the quick-release supports by pressing
on their rear sections with your heel (17:A)
Once the quick-release supports
have been opened, the arms of the at-
tachment are free and no longer secu-
red to the hook-up device.
    
operation, replace the arms on the sup-
port and reclose.
1. Carry out the necessary corrective action,
e.g.:
• Release the belt.
• Replace the attachment by unhooking the arms
(19).
Tensioning the belt (17; 18)
First tension one side and then the other accor-
ding to the instructions provided below.
Do not turn the lever using your hands.

1. Place your foot on the lever (18:A) and care-
fully turn it 180° forwards.
2. Install the cotter pin or lock pin (17:C).
3. Repeat the operation on the other side.
7 START-UP AND OPERATION
7.1 PRECAUTIONS FOR USE
Always make sure the engine oil level
is correct. This is particularly important
when operating on slopes (see 7.4).
Pay attention when mowing on slopes:
avoid abrupt starts and stops, do not
run the machine transversally to the
slope but run from top to bottom and
vice versa.
Apply the parking brake when you park
the machine.
The machine may not be driven on slo-
pes greater than 10º in any direction.
Reduce the speed on slopes and when
making sharp turns in order to retain
control of the machine and reduce the
risk of overturning.
Do not turn the steering wheel to full
lock when driving at full speed. The ma-
chine may overturn.
Keep hands and feet well away from the
-

7.2 COMBINED USE OF ACCESSORIES
For the combined use of accessories,
please refer to the "TABLE FOR THE
CORRECT COMBINATION OF ACCES-
SORIES" in section "0 TECHNICAL
DATA TABLE"
7.3 REFUELLING
Always use lead-free petrol only. DO

For the capacity of the fuel tank, please refer to “0
TECHNICAL DATA TABLE” The transparency of
the tank allows the user to check the level easily.
NOTE! Petrol is perishable and should
not remain in the tank for more than 30
days.
It is possible to use ecological fuels, i.e. alkylate
petrol. The composition of these petrols is less
harmful to people and the environment.
No negative eects linked to use of the same
have been reported. However, there are types
of alkylate-based petrol available on the market
EN
ENGLISH
(Translation of the Original Instructions)
15
… 161 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stiga 740 WX - P 901 CH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stiga 740 WX - P 901 CH in the language / languages: All languages as an attachment in your email.

The manual is 110,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info