608664
159
Zoom out
Zoom in
Previous page
1/588
Next page
The pedal (10:B) has the following positions:
Released: Traction is engaged. The
parking brake is not activated.
Pressed to halfway: Forward drive
disengaged. The parking brake is not
activated.
Pressed right down. Drive disengaged. The
parking brake is fully activated but not locked. This
position is also used as an emergency brake.
6.3 PARKING BRAKE LOCKING LEVER
(10:A)
The lever locks the “brake” pedal in the
pressed right down position. This function
is used to lock the machine on slopes, du-
ring transport, etc., when the engine is not running.
Locking:
1. Press the pedal (10:B) right down.
2. Move the locking lever (10:A) to the right.
3. Release the pedal (10:B).
4. Release the locking lever (10:A).
Unlocking:
1. Press and release the pedal (10:B).
6.4 TRACTION PEDAL (10:F)
The pedal determines the gearing ratio between
the engine and the drive wheels (= the speed).
When the pedal is released, the service brake is
activated.
- Press the pedal forward – the machine
moves forward.
- No load on the pedal – the machine is
stationary.
- Press the pedal backward – the
machine reverses.
- Reduce the pressure on the pedal – the machine
brakes.
A plate is installed on the upper section of the pe-
dal which can be adjusted to suit the driver’s foot.
       -
pected when the pedal is released, the
left pedal (10:B) should be used as an
emergency brake.
6.5 STEERING WHEEL (10: D)
The height of the steering wheel is fully adjustable.
Unscrew the adjustment knob (10:E) on the stee-
ring column and raise or lower the steering wheel
accordingly. Tighten.

the machine is running.
Never turn the steering wheel when the
machine is stationary with a lowered
attachment. There is a risk of abnormal
loads on the servo and steering mecha-
nisms.
6.6 THROTTLE AND CHOKE CONTROL
[B&S Power Built] [B&S Intek] (11:A)
A control for regulating the engine speed and
using the choke when starting the engine in cold
conditions.
If the engine runs unevenly (alternate
variation in the number of engine revs)
the control may be too far forward, thus
activating the choke. This damages the
engine, increases fuel consumption
and is harmful to the environment.
Choke – for starting the engine in cold
conditions. Do not use this position when
the engine is warm.
Full throttle – should always be used when
the machine is in use. The full throttle
position is approximately 2 cm behind the
choke position.
Idling.
6.7 THROTTLE CONTROL (ACCELERATOR)
(12:A) MOD.: [B&S Vanguard]
Control for regulating engine running speed.
Full throttle – should always be used when
the machine is in use.
Idling.
6.8 CHOKE CONTROL (12:B) - MOD.: [2WD]
A choke control to be used when starting the
engine in cold conditions.
Control fully pulled out (12:B1) - buttery
closed. For starting the machine in cold
conditions.
Control pushed in (12:B2) - buttery open. For
starting the engine in warm conditions and during
operation.
Do not use the choke when the engine
is warm.
EN
ENGLISH
(Translation of the Original Instructions)
13
159


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stiga 740 WX - P 901 CH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stiga 740 WX - P 901 CH in the language / languages: All languages as an attachment in your email.

The manual is 110,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info