720686
7
Zoom out
Zoom in
Previous page
1/14
Next page
7
DO-Use blade guards at all times.
DO-Keep hands out of path of saw blade.
DO-Shut off power, disconnect cord from power source
and wait for saw blade to stop before servicing or
adjusting tool.
DO-Support long work with an outboard tool rest.
DO-Use only 10 inch diameter blades.
Do not use saw blades which are damaged or deformed
DON’T-Attempt to operate on anything but designated
voltage.
DON’T-Operate unless all clamp handles are tight.
DON’T-Use blades larger or smaller than those which
are recommended.
DON’T-Wedge anything against fan to hold motor shaft.
DON’T-Force cutting action. (Stalling or partial stalling of
motor can cause major damage. Allow motor to reach
full speed before cutting.)
DON’T-Cut ferrous metals (Those with any iron or steel
content) or any masonry.
DON’T-Use abrasive wheels. The excessive heat and
abrasive particles generated by them will damage saw.
DON’T-Allow anyone to stand behind saw.
DON’T-Apply lubricants to the blade when it’s running.
DON’T-Place either hand in the blade area when the
saw is connected to the power source.
DON’T-Use blades rated less than 5500 R.P.M.
DON’T-Attempt to cut small pieces (hand within 6" of
blade) without clamping.
DON’T-Operate saw without guards in place.
DON’T-Perform any operation freehand.
DON’T-Reach around or behind saw blade.
DON’T-Place hands closer than 6 inches from the saw
blade.
DON’T-Reach underneath the saw unless it is turned off
and unplugged. The saw blade is exposed on the
underside of the saw.
DON’T-Move either hand from saw or workpiece or raise
arm until blade has stopped.
DON’T-Use without Kerf Plate or when kerf slot is wider
than 3/8"
DON’T- Carry saw by work extension or other accessory.
CAUTION: Some wood contains preservatives
such as copper chromium arsenate (CCA) which
can be toxic. When cutting these materials extra
care should be taken to avoid inhalation and minimize skin
contact.
CAUTION: Use of this tool can generate dust
containing chemicals known to cause cancer,
birth defects or other reproductive harm. Use
appropriate respiratory protection.
CAUTION: Do not connect unit to electrical
power source until complete instructions are
read and understood.
For your convenience and safety, the following warning
labels are on your mitre saw.
ON MOTOR HOUSING:
WARNING: FOR YOUR OWN SAFETY, READ
INSTRUCTION MANUAL BEFORE OPERATING SAW.
WHEN SERVICING, USE ONLY IDENTICAL
REPLACEMENT PARTS. ALWAYS WEAR EYE
PROTECTION.
ON FENCE:
CLAMP SMALL PIECES BEFORE CUTTING. SEE
MANUAL.
ON GUARD:
DANGER – KEEP AWAY FROM BLADE.
ON GUARD RETAINER PLATE: “PROPERLY SECURE
BRACKET WITH BOTH SCREWS BEFORE USE.”
ON TABLE: (2 PLACES)
ALWAYS TIGHTEN ADJUSTMENT KNOBS BEFORE USE.
KEEP HANDS 6" FROM PATH OF SAW BLADE. NEVER
PERFORM ANY OPERATION FREEHAND. NEVER CROSS
ARMS IN FRONT OF BLADE. THINK! YOU CAN PREVENT
ACCIDENTS. DO NOT OPERATE SAW WITHOUT
GUARDS IN PLACE. NEVER REACH IN BACK OF SAW
BLADE. ALWAYS WEAR EYE PROTECTION. SHUT OFF
POWER AND WAIT FOR BLADE TO STOP BEFORE
SERVICING, ADJUSTING TOOL, OR MOVING HANDS.
(Original instructions) ENGLISH
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stanley STSM1510 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stanley STSM1510 in the language / languages: English as an attachment in your email.

The manual is 0,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info