720686
12
Zoom out
Zoom in
Previous page
1/14
Next page
TROUBLE! SAW WILL NOT START
WHAT’S WRONG? WHAT TO DO…
1. Saw not plugged in 1. Plug in saw
2. Fuse blown or circuit 2. Replace fuse or reset
breaker tripped circuit
breaker
3. Cord damaged 3. Have cord replaced by
authorized service center
4. Brushes worn out 4. See “Brushes” in this
manual
TROUBLE! SAW MAKES UNSATISFACTORY CUTS
WHAT’S WRONG? WHAT TO DO…
1. Dull blade 1. Replace blade
2. Blade mounted 2. Turn blade around
backwards
3. Gum or pitch on blade 3. Remove blade and
clean with turpentine
and coarse steel wool
or household oven
cleaner
4. Incorrect blade for work 4. Change the blade
being done
TROUBLE! BLADE DOES NOT COME UP TO SPEED
WHAT’S WRONG? WHAT TO DO…
1. Extension cord too light 1. Replace with adequate
or too long size cord
2. Low house current 2. Contact your electric
company
TROUBLE! MATERIAL PINCHES BLADE
WHAT’S WRONG? WHAT TO DO…
1. Cutting bowed material 1. Position bowed material
as shown in Figure 11
TROUBLE! MACHINE VIBRATES EXCESSIVELY
WHAT’S WRONG? WHAT TO DO…
1. Saw not mounted 1. Tighten all mounting
securely hardware
2. Stand or bench on 2. Reposition on flat level
uneven floor surface
3. Damaged saw blade 3. Replace blade
TROUBLE! DOES NOT MAKE ACCURATE MITRE CUTS
WHAT’S WRONG? WHAT TO DO…
1. Mitre scale not adjusted 1. Check and adjust
correctly
2. Blade is not square to 2. Check and adjust
fence
3. Workpiece moving 3. Clamp workpiece to
fence or glue 120 grit
sandpaper to fence
with rubber cement
12
NOTE
Stanley's policy is one of continuous improvement to our
products and, as such, we reserve the right to change
product specifications without prior notice.
Standard equipment and accessories may vary by
country.
Product specifications may differ by country.
Complete product range may not be available in all
countries. Contact your local Stanley dealers for range
availability.
Trouble Shooting Guide
BE SURE TO FOLLOW SAFETY RULES AND
INSTRUCTIONS
ENGLISH (Original instructions)
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stanley STSM1510 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stanley STSM1510 in the language / languages: English as an attachment in your email.

The manual is 0,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info