720594
18
Zoom out
Zoom in
Previous page
1/240
Next page
18
- Lock the shaft of the brush cutter
at the intended location with a
screwdriver or with the hex key (28)
supplied.
- Turn the hex nut counter-clockwise to
the shaft and tighten itthe spark plug
wrench (29).
ATTENTION: Left hand thread
Connecting the drive unit and
Assembly:
Plug in the ends of the connected
modules together. Make sure that the
locking pin (26) snaps into place. Check
by pulling aparton a trial basis. Fold
down cover (26a) and secure assembly
by tightening the locking screw (10).
Release of the drive unit and
Assembly:
Release the locking screw (10).
The cover (26a) jumps back. Hold the
locking pin under the cover pressed
down (26) and at the same time
loosen the modules from one another
simultaneously by carefully pulling
apart.
The blade must be polished only by
suitably qualified and experienced
specialists.
Improperly polished blades increase
the risk of breakage and cracks.
G
B
10
26a
26
Teil B
Teil C
26
26a
10
a
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stanley STR-4 in 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stanley STR-4 in 1 in the language / languages: English, German, Danish, French, Italian, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 9,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info