720594
19
Zoom out
Zoom in
Previous page
1/240
Next page
19
A9
5.4 Brush cutter-grass trimmer-pruner-hedge cutter combination device: Pruner
RISK OF INJURY
ATTENTION: For all work performed on and for cutting tools, always wear gloves
Module 4 Mounting
Before you begin with the tree care, it is necessary to mount the saw
chain and the blade to the device. The chain has very (22) sharp edges.
When raising the chain
(22) use safety gloves without fail.
1. First remove the chain guard from the blade unit.
2. Then rotate the locking screw on the cutting head (D) with the wrench
(32) counter-clockwise and remove the upper housing cover.
3. Set the saw chain into the groove guide of the blade unit (23). Start as
far as possible at the blade's top edge.
Pay close attention to the correct direction of the cut. On the blade unit
as well as in the inner housing below the chain wheel there is a direction
arrow, which must align with the direction of rotation on the blade.
Place the saw chain around the chain sprocket (e) and set the blade unit
on the bolt of the tension slide (f). Make sure that the bolt intervenes in
the corresponding opening on the blade.
If necessary, turn the screw on the tensioner (g). So that a uniform wear
of the chain blade is ensured, the the chain blade (23) should be rotated
after 8 - 10 working hours.
Make sure that there is always a correct tension of the chain and check
them before each use of the device. A loose chain could get loosened
from the guide groove of the blade unit and cause serious injury. Further a
loose chain also increases the danger of a backlash. In addition, the blade
, chain and chain sprocket get worn out faster
23 22
f e
21
22
23
f
e
g
d
32
G
B
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stanley STR-4 in 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stanley STR-4 in 1 in the language / languages: English, German, Danish, French, Italian, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 9,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info