Manual Stanley STR-4 in 1 (page 17 of 240) (English, German, Danish, French, Italian, Swedish, Norwegian, Finnish)

720594

Zoom out

Zoom in

1/240

5.3 Brush cutter-grass trimmer-pruner-hedge cutter combination device: Brush cutter

RISK OF INJURY

ATTENTION: For all work performed on and for cutting tools, always wear gloves.

- Danger of backlash! There is always danger of backlash, if the blade tips come into contact

with branches or other objects. The brush cutter becomes uncontrollable due to this and can

pushed with great force in the direction of the operator.

Module 3 Mounting

To use the device as brush cutter, the

cutting guard and the cutter blade

have to be mounted. Do not remove

the cutting guard (15), if you replace

thread spool (19), or blade (11)

- Attach the cutting guard (15) with the

4 screws to the holding bracket at the

shank (if not already ﬁtted). - Install

blade (11) as shown in Figures 1 to 6.

- Lock the shaft of the brush cutter

in the required position using a

screwdriver or with the hex key (28)

supplied.

- Turn the thread spool (19) in the

clockwise direction from the shaft (if

already installed).

- Leave the support ﬂange (17) on the

shaft.

- Set the cutter blade (11) on the

support ﬂange (inscription facing the

user).

- Place the clamping ﬂange

(13) and the retaining plate (16) (note

orientation) on the cutter blade (11).

26a

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Stanley STR-4 in 1 in the language / languages: English, German, Danish, French, Italian, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 9,41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Stanley STR-4 in 1 Manual

Product: