742373

SQlab ERGOLUX Manual

39
Zoom out
Zoom in
Previous page
1/96
Next page
SQlab | SPORTS ERGONOMICS | ERGOLUX® SADDLES | EDITION US 2019-02 | Page 15
E-bikes and pedelecs with CE mark and pedal assistance up to 25 km/h are covered by the Machinery Directive, therefore components of
these bicycles may not be easily replaced or modied. In order to clarify the situation, a guideline for replacing E-bike/Pedelec 25 parts
has been jointly released by the associations Zwerad-Industrie-Verband (ZIV) and Verbund Service und Fahrrad (VSF) in cooperation with
the Zedler-Institut and the Bundesinnungs- band Fahrrad (BIV).
The guideline clearly regulates which bicycle dealers and repairers are allowed to replace parts on these vehicles and for which parts
they require approval from vehicle manufacturers or system suppliers. As such, it can be regarded as a recommended course of action.
Replacing the ERGOLUX
®
saddles on a Pedelec25 is possible based on the recommendations of the "Guidelines for the replacement of
components in CE-marked e-bikes/pedelecs with pedal assistance up to 25 km/h" of the Zweirad-Industrie-Verband (ZIV) and Service
and Bicycle Association (VSF) in cooperation with the Zedler-Institut and the Bundesinnungsverband Fahrrad (BIV), provided the dis-
placement towards the rear to the series/original use area is not greater than 20 mm. A changed load distribution beyond the intended
adjustment range may cause critical steering characteristics. The length of the seat stays on the saddle frame and the saddle shape also
play a role.
On our website www.sq-lab.com/service/downloads/ in the service area under Downloads you will nd a document called eBike Ready.
There you will nd detailed information about the component exchange on Pedelec25, as well as the guide for the component exchange
made by the associations Zweirad-Industrie-Verband (ZIV), Verbund Service und Fahrrad (VSF), the Zedler Institute and the Bundesin-
nungsverband Fahrrad (BIV).
Component replacement of the ERGOLUX
®
saddles on fast pedelecs, so-called S-Pedelec, which are classied as motor vehicles and are
subject to EU Directive 2002/24 / E6 or EU Regulation No. 168/2013, is possible based on the guideline " Component replacement on
S-pedelecs - fast e-bikes / pedelecs with a pedal assist up to 45 km/h" of the German Association of the German Bicycle Mechanic (BIV),
TÜV Rheinland, velotech.de, Association Service and Bicycle (VSF), Zedler- Institute and the Zweirad-Industrie-Verband (ZIV), provided
that the oset to the rear of the standard/original application area is not greater than 20 mm. A changed load distribution beyond the
intended adjustment range may cause critical steering characteristics. The length of the seat stays on the saddle frame and the saddle
shape also play a role.
On our website www.sq-lab.com/service/downloads/ in the service area under Downloads you will nd a document called eBike Ready.
There you will nd detailed information about the component exchange on Pedelec45, as well as the guide for the component exchange
made by the associations Zweirad-Industrie-Verband (ZIV), Verbund Service und Fahrrad (VSF), the Zedler Institute and the Bundesin-
nungsverband Fahrrad (BIV).
Replacing SQlab ERGOLUX
®
saddles on Pedelec25
Replacing SQlab ERGOLUX
®
saddles on Pedelec45
eBike Ready
SQlab products bearing the „eBike Ready“ rating are suitable for use on pedelecs from the point of view of function, ergonomics and
operational stability (in accordance with the standards DIN EN ISO 4210 and DIN EN ISO 15194).
The SQlab Label eBike Ready refers exclusively to the use on pedelecs with pedal assistance up to 25 km/h. The eBike Ready label can
be found on the packaging, the user manual and the product page of your SQlab product
… 39 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for SQlab ERGOLUX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of SQlab ERGOLUX in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info