Manual SQlab ERGOLUX (page 37 of 96) (English, German, Dutch, French)

742373

Zoom out

Zoom in

1/96

SQlab | SPORTS ERGONOMICS | ERGOLUX® SADDLES | EDITION US 2019-02 | Page 13

Clamp your SQlab ERGOLUX

saddle only within the scale shown on the seat stays.

Note: In the case of a longer lower clamping jaw, make sure that the saddle is not defor-

med during tightening.

Rear of saddle/horizontal positioning of saddle

First mount the saddle in the middle of the clamping area. Vary the position backwards and forwards according to

your requirements, starting from the middle position within the adjustment range. For information on how to proper-

ly adjust the position of the saddle, refer to your bike's guide, and to a variety of books and guides on bike ergonomics.

Your SQlab dealer will certainly be happy to help you.

Tip: The SQlab ERGOLUX

saddle should tend to be pushed a little farther forward than your previous saddle.

Warning

If the clamping is outside the specied range, product safety may become impaired

and damage with breakage could occur. In such case, the saddle frame could sud-

denly and unexpectedly break during use and an accident may occur.

If in doubt about the right setting, please contact your dealer.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of SQlab ERGOLUX in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,79 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

SQlab ERGOLUX Manual

Product: